Tips:For details, please confirm the matching in "confirmed it" to confirm whether the parts are suitable for your vehicle application.If you have any questions about the struts, please feel free to contact us.
Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
More Stable: A new increase tire grip. By increasing the spring rate factor, the rapid vibration of the wheels is suppressed and the tires are prevented from leaving the road.
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
Year
2004
2004 - 2011
2005 - 2011
2005 - 2006
2007 - 2011
2009 - 2011
2007 - 2008
2009 - 2010
Make
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Pontiac
Model
Aveo
Aveo
Aveo
Aveo
Aveo5
Aveo5
Aveo5
G3
Trim
Base
LS
LT
Special Value
LS
LT
Special Value
Base
Engine
1.6L L4
1.6L L4
1.6L L4
1.6L L4
1.6L L4
1.6L L4
1.6L L4
1.6L L4
Note
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.
Installation Steps
Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.
Product Description
Reviews
4.7/5
Based on 7 reviews
5
86%
4
0%
3
14%
2
0%
1
0%
M
Molly Latinen
03/23/2025
Verified buyer
The kit arrived quickly and in good condition. I did not remove wheels just jacked the frame up about 6 inches with wheels still touching the ground. These work awesome when airing up to get sag out when camper is out I. The truck bed. Much more stable ride with less roll and sway. Great purchase
6
69VANMAN
01/31/2024
Verified buyer
Good fit with a good price, super satisfied
FAQS
Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2007-2011 Chevrolet Aveo5 1.6L L4 | Front Shock Absorber w/Spring | 96980825/172296 - PHILTOP
Front
Complete Strut & Coil Spring Assembly
SKU:
3537SAA752HUS
4.7
$138.79$13879
Check if this fits your vehicle
Select a vehicle to check this product.
Items Included
1x Front Right Complete Strut Assembly - 172295 1x Front Left Complete Strut Assembly - 172296
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Fitment: PHILTOP Front Struts for Aveo 2004-2011, G3 2009, Jimmy 1981-1986, Nova 1971.
Tips:For details, please confirm the matching in "confirmed it" to confirm whether the parts are suitable for your vehicle application.If you have any questions about the struts, please feel free to contact us.
Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
More Stable: A new increase tire grip. By increasing the spring rate factor, the rapid vibration of the wheels is suppressed and the tires are prevented from leaving the road.
4.7
7 reviews
5 star: 6
3 star: 1
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
2004
Chevrolet
Aveo
Base
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2004 - 2011
Chevrolet
Aveo
LS
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2005 - 2011
Chevrolet
Aveo
LT
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2005 - 2006
Chevrolet
Aveo
Special Value
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2007 - 2011
Chevrolet
Aveo5
LS
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2009 - 2011
Chevrolet
Aveo5
LT
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2007 - 2008
Chevrolet
Aveo5
Special Value
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
2009 - 2010
Pontiac
G3
Base
1.6L L4
Replaces Part 182295,182296;Recommended OE Application -Specific Replacement;Front Left;Front Right
Product Specifications
Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 172295 1x Front Left Complete Strut Assembly - 172296
Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.
Installation Steps
Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.
Product Description
Reviews
4.7/5
Based on 7 reviews
5
86%
4
0%
3
14%
2
0%
1
0%
M
Molly Latinen
Mar 23,2025
Verified buyer
The kit arrived quickly and in good condition. I did not remove wheels just jacked the frame up about 6 inches with wheels still touching the ground. These work awesome when airing up to get sag out when camper is out I. The truck bed. Much more stable ride with less roll and sway. Great purchase
6
69VANMAN
Jan 31,2024
Verified buyer
Good fit with a good price, super satisfied
FAQS
Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.