2013-2020 Ford Fusion 2.0L/2.5L/1.5L/1.6L | Front Shock Absorber w/Sway Bar link, w/Spring | 272638 - PHILTOP

2013-2020 Ford Fusion 2.0L/2.5L/1.5L/1.6L | Front Shock Absorber w/Sway Bar link, w/Spring | 272638 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6286SAA371SUS

Specifications

Brand
PHILTOP
Items Included
2x Front Strut & Coil Spring Shock Assemblies - 272638
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
272638

Highlights

  • Vehicle Specific: PHILTOP complete shock struts Assembly Fit for Fusion 2013 2014 2015 2016 2017 2018 2019 2020 front struts left and right side. Replace shocks and struts complete assembly No#: 272638.
  • More Stability: The struts increase tire grip. By increasing the spring rate factor, the rapid vibration of the wheels is suppressed and the tires are prevented from leaving the road.
  • Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
  • Shorten Braking Distance: A new struts assembly helps maximize tire-to-road contact and distributes body weight evenly to each tire, which can shorten braking distances due to strut wear.
  • Tips: If you have any questions about the struts, please feel free to contact us. We will respond to your questions within 24 hours.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2017 - 20182016 - 20182016 - 20202017 - 20182013 - 20202014 - 20182014 - 20202013 - 20142013 - 20202013 - 20202019 - 202020192019 - 20202013 - 2020
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelFusionFusionFusionFusionFusionFusionFusionFusionFusionFusionFusionFusionFusionFusion
TrimEnergi PlatinumEnergi SEEnergi TitaniumPlatinum HybridSS HybridSESESESE HybridSELSELSEL HybridTitanium Hybrid
Engine2.0L L42.0L L42.0L L42.0L L42.5L L42.0L L41.5L L41.6L L42.5L L42.0L L41.5L L42.5L L42.0L L42.0L L4
Note
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only
Hybrid Models Only

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14-1

Reviews

5.0/5

Based on 3 reviews

5100%
40%
30%
20%
10%

Evelyn Rucker

12/15/2024

Verified buyer

I'm glad it's what I expected.

Jason Sanchez

09/16/2024

Verified buyer

Bueno

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.