2014-2019 Nissan Sentra 1.8L L4 | Front Shock Absorber w/Spring | 172947 - PHILTOP

2014-2019 Nissan Sentra 1.8L L4 | Front Shock Absorber w/Spring | 172947 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1799SAA731WUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 172947 1x Front Left Complete Strut Assembly - 172948
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
172947,172948,SR4399,SR4398

Highlights

  • (Adapted models):PHILTOP Strut Assembly fit for Sentra 2014 2015 2016 2017 2018 2019. Replace complete shocks struts assembly No#:172947 172948 but to perfectly fit your vehicle, you can use the year, make, and model in the 'Suncentautoconfirmedfit' filtering system in the upper left corner of the link to confirm compatibility.
  • (Shorten the braking distance): A new struts assembly helps maximize tire-to-road contact and distributes body weight evenly to each tire, which can shorten braking distances due to strut wear
  • (Reduce rebound):Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy
  • (Prevent rollover and sideslip):Replacing the worn struts improves roll and skid when turning and enhances cab capacity, providing you with a smoother ride
  • (Improve vehicle handling):PHILTOP strut provides structural support to the vehicle suspension, helping to restore body height to prevent grounding. It will improve driving maneuverability by 50%

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2014 - 201620142014 - 20192014 - 20192014 - 20192014 - 2019
MakeNissanNissanNissanNissanNissanNissan
ModelSentraSentraSentraSentraSentraSentra
TrimFE+SFE+SVSSLSRSV
Engine1.8L L41.8L L41.8L L41.8L L41.8L L41.8L L4
Note
Front Left;Front Right
Front Left;Front Right
Front Left;Front Right
Front Left;Front Right
Front Left;Front Right
Front Left;Front Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Deondray Carter

02/16/2025

Verified buyer

Saved the 330ci. Great setup fit oem to the tee. Ride height slightly higher but it may settle. Good price for quality

Rachel

01/12/2025

Verified buyer

The struts looks good.

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.

2014-2019 Nissan Sentra Front Shock Absorber w/Spring | 172947 | PHILTOP