1993-2002 Toyota Corolla 1.6L L4/1.8L L4 | Front Shock Absorber w/Spring | 271952 - PHILTOP

1993-2002 Toyota Corolla 1.6L L4/1.8L L4 | Front Shock Absorber w/Spring | 271952 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2336SAA711KUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 271951 1x Front Left Complete Strut Assembly - 271952
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
271952,271951,SR4063,SR4065,SR4062,SR4064

Highlights

  • Fitment: Compatible with Corolla 1998 1999 2000 2001 2002, Prizm 1993 1994 1995 1996 1997. Please Comfirm our products are compatible with your car. Manufacturer Part Number: 71951, 71952, 234057, 234058, 331639L, 331639R, 332323L, 332323R, 332335, 333114, 333115, 333236, 333237, 42140141, 42140142, 733038, G55999
  • Improve driving comfort: Shock absorbers can reduce the vibration and bumps of the vehicle during driving, so that passengers can feel a smoother driving experience.
  • Increase safety: Shock absorbers can improve the stability and handling of the vehicle, reducing the risk of rollover and loss of control when the vehicle is driven at high speed or in an emergency.
  • Extend vehicle life: Shock absorbers reduce wear and damage to vehicle components, extending the overall life of the vehicle and reducing maintenance costs.
  • Improve fuel economy: shock absorbers can reduce the resistance of the vehicle during driving, improve fuel economy and reduce fuel costs.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1998 - 20021998 - 20021993 - 19971993 - 19971993 - 19971993 - 199719971997 - 20021993 - 19971993 - 19951997 - 20022001 - 20021998 - 2000
MakeChevroletChevroletGeoGeoGeoToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelPrizmPrizmPrizmPrizmPrizmCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorolla
TrimBaseLSiBaseLSiLSiBaseCECEDXLELESVE
Engine1.8L L41.8L L41.6L L41.6L L41.8L L41.6L L41.6L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L4
Note
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right
Replaces Part 281952;Front Left;Front Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14-1

Reviews

4.5/5

Based on 4 reviews

575%
40%
325%
20%
10%

Rob_HomeGarage_344

12/18/2025

These are really well-made parts. You can tell they're good quality just by looking at them. For the price, it's hard to find anything better. My car feels great.

SarahDrives_305

04/02/2026

My old Corolla was bouncing all over the place. These struts fixed that right up! The handling is way better and it feels so much more stable on the road.

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.