PHILTOP Front Suspension Kit for Explorer 1997-2010, Mountaineer 1998-2010, Upper Control Arm And Ball Joint Outer Inner Tie Rod

PHILTOP Front Suspension Kit for Explorer 1997-2010, Mountaineer 1998-2010, Upper Control Arm And Ball Joint Outer Inner Tie Rod

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7189CAK377MUS

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Control Arm W/Ball Joint - Passenger Side - K620224 1x Front Upper Control Arm W/Ball Joint - Driver Side - K620225 2x Front Lower Ball Joints - K8695 2x Front Outer Tie Rods - ES3461 2x Front Inner Tie Rods - EV421 2x Front Sway Bar Links - K7275 2x Front Rack Boots - Bt-210
Quantity
12
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
MEOE14,F57Z3050BB,5L5Z3A130AA,F87Z3A130BA,1L2Z3084AA,1L2Z3085AA,1L2Z3280CA
Part Number
K7275,K8695,K8695T,ES3461,EV421,MK8695T,RK620225,RK620224,MES3461,TA5300,MEV421,GEV421,535148,IS421XL

Highlights

  • #22,809 in Automotive (See Top 100 in Automotive)
  • #43 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with 1997-2010 Explorer, 1998-2010 Mountaineer. Please check fitment for accurate information before purchasing
  • Kit Includes:1x Front Upper Control Arm w/Ball Joint - Passenger Side - K620224, 1x Front Upper Control Arm w/Ball Joint - Driver Side - K620225, 2x Front Lower Ball Joints - K8695, 2x Front Outer Tie Rods- ES3461, 2x Front Inner Tie Rods - EV421, 2x Front Sway Bar Links - K7275, 2x Front Rack Boots - BT-210
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 2003
MakeFordFordFordFordFordMercury
ModelExplorerExplorerExplorerExplorerExplorerMountaineer
TrimEddie BauerLimitedPostalXLSXLTBase
Engine4.0L V64.0L V64.0L V64.0L V64.0L V64.0L V6
Note------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

Jason_Trucks_20

11/05/2025

The quality of these parts is really impressive for the price. They look and feel like they'll hold up well over time. Great value.

SarahDrives_781

03/27/2026

Installation was a breeze, everything lined up perfectly. Plus, the shipping was incredibly fast. Couldn't have asked for a smoother transaction.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.