PHILTOP Front Suspension Kit Upper Control Arm w/Ball Joint for 2000-2005 Buick LeSabre Park Avenue Riviera Cadillac DeVille Sev

PHILTOP Front Suspension Kit Upper Control Arm w/Ball Joint for 2000-2005 Buick LeSabre Park Avenue Riviera Cadillac DeVille Sev

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7632OCA180EUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Left Side Control Arm W/ Ball Joint - K620291 1x Front Lower Right Side Control Arm W/ Ball Joint - K620292
Quantity
2
Position
Front Lower
Surface Finish
Polished
Material
Aluminum
Warranty Period
2-Year
OE Number
25766508,25766509,25766511,25766510,25696334,88967801,88986632,25699467,25699468,88986633,25696335,19202594,25745395,25702222,25745396,25676218,25676219,25703055,25702221,25703056,25746324,25745394,25746325
Part Number
RK620291,RK620292

Highlights

  • #53,017 in Automotive (See Top 100 in Automotive)
  • #107 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with Buick LeSabre 2000-2005, Riviera 1998-1999 , Park Avenue 1998-2005,compatible with Cadillac DeVille 2000-2005, Seville 1998-2004,compatible with Pontiac Bonneville 2000-2005, compatible with Oldsmobile Aurora 1998-1999 2001-2003
  • Suspension Kit Includes:1x Front Lower Left Side Control Arm w/ Ball Joint - K620291;1x Front Lower Right Side Control Arm w/ Ball Joint - K620292
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2000 - 20052000 - 20051998 - 20051998 - 20051998 - 19992000 - 20052000 - 20052000 - 20052004 - 20051998 - 20041998 - 20032001 - 20021998 - 19992001 - 20032004 - 20052000 - 20052000 - 20052000 - 2003
MakeBuickBuickBuickBuickBuickCadillacCadillacCadillacCadillacCadillacCadillacOldsmobileOldsmobileOldsmobilePontiacPontiacPontiacPontiac
ModelLeSabreLeSabrePark AvenuePark AvenueRivieraDeVilleDeVilleDeVilleDeVilleSevilleSevilleAuroraAuroraAuroraBonnevilleBonnevilleBonnevilleBonneville
TrimCustomLimitedBaseUltraBaseBaseDHSDTSProtection SeriesSLSSTSBaseBaseBaseGXPSESLESSEi
Engine3.8L V63.8L V63.8L V63.8L V63.8L V64.6L V84.6L V84.6L V84.6L V84.6L V84.6L V83.5L V64.0L V84.0L V84.6L V83.8L V63.8L V63.8L V6
Note-----
w/o Heavy Duty Suspension
w/o Heavy Duty Suspension
w/o Heavy Duty Suspension
w/o Heavy Duty Suspension
---------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 6 reviews

567%
433%
30%
20%
10%

RickFixIt_100

03/05/2026

The quality of these parts is impressive, especially for the price. They feel very robust and durable. I'm expecting them to hold up well over time.

DIY_Karen_464

01/26/2026

Came in really quickly and fit perfectly on my DeVille. The installation process was surprisingly easy, and all the hardware was included. Great buy!

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.