PHILTOP Front Suspension Kit Upper Control Arm w/Ball Joints Compatible with Ford Crown Victoria Lincoln Town Car Grand Marquis

PHILTOP Front Suspension Kit Upper Control Arm w/Ball Joints Compatible with Ford Crown Victoria Lincoln Town Car Grand Marquis

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4173OCA236MUS

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Left Control Arm + Ball Joint- K80709 1x Front Upper Right Control Arm + Ball Joint- K80708
Quantity
2
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
F7AZ3084AA,F7AZ3085AA,F5AZ3084A,F6AZ3084AA,F6AZ3085AA,F5AZ3085A
Part Number
RK80708,RK80709

Highlights

  • #40,478 in Automotive (See Top 100 in Automotive)
  • #75 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with Mercury Grand Marquis 1995-2002, compatible with Lincoln Town Car 1995-2002, compatible with Ford Crown Victoria 1995-2002
  • Suspension Kit Includes:1x Front Upper Left Control Arm + Ball Joint- K80709;1x Front Upper Right Control Arm + Ball Joint- K80708
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1995 - 200220021995 - 20021995 - 20021995 - 200219961995 - 19991995 - 20022001 - 200219951995 - 20022001 - 20021995 - 2002199519971995 - 20021995 - 2002
MakeFordFordFordFordFordLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnMercuryMercury
ModelCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarGrand MarquisGrand Marquis
TrimBaseLWBLXPolice InterceptorSAnniversaryBaseCartierCartier LCypressExecutiveExecutive LSignatureTouring EditionTouring EditionGSLS
Engine4.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V8
Note
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package
Exc. Handling Package

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

George goebel

05/11/2026

Verified buyer

Upper control arms fit real well

SarahDrives_977

11/06/2025

The finish on these is impressive, and they feel really solid. Seems like a great value for what you get. Much better than some of the cheaper generic brands I've seen around.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.