PHILTOP Front Suspension Kit Upper Lower Control Arm w/Ball Joints Compatible with Jeep Grand Cherokee Commander 2005 2006 2007

PHILTOP Front Suspension Kit Upper Lower Control Arm w/Ball Joints Compatible with Jeep Grand Cherokee Commander 2005 2006 2007

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1812OCA261GUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm W/ Ball Joint - Driver Side - MS25170/RK6213751x Front Lower Control Arm W/ Ball Joint - Passenger Side - MS25171/RK621374
Quantity
2
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
5290635AA,5290634AA,52089980AF,52089981AF,52089980AG,52089981AG,52089981AD,52089981AI,52089980AD,52089980AI,52089981AC,52089981AB,52089981AA,52089980AC,52089980AA,52089980AB
Part Number
RK621375,RK621374,TC3716,TC3715,521064,GS25170,GS25171,CK621374,CK621375,CB96004,CB96004PR,CB96003PR

Highlights

  • #53,008 in Automotive (See Top 100 in Automotive)
  • #107 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with Jeep Grand Cherokee 2005-2010 3.7L/4.7L/5.7L/3.0T, Commander 2006-2010
  • Suspension Kit Includes:1x Front Lower Control Arm w/ Ball Joint - Driver Side - MS25170/RK621375;1x Front Lower Control Arm w/ Ball Joint - Passenger Side - MS25171/RK621374
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200620062006 - 20072006 - 20072006 - 20092006 - 20102007 - 20092007 - 20102007 - 20092010200620062007 - 20092005 - 20102005 - 200920102007 - 20092009 - 20102005 - 20092005 - 20102007 - 20092006 - 2009
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand Cherokee
Trim65th Anniversary Edition65th Anniversary EditionBaseBaseLimitedLimitedOverlandSportSportSport65th Anniversary Edition65th Anniversary EditionLaredoLaredoLaredoLaredoLimitedLimitedLimitedLimitedOverlandOverland
Engine3.7L V64.7L V83.7L V64.7L V84.7L V85.7L V85.7L V83.7L V64.7L V85.7L V83.7L V64.7L V83.0L V63.7L V64.7L V85.7L V83.0L V63.7L V64.7L V85.7L V83.0L V65.7L V8
Note----------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Rob_HomeGarage_612

03/16/2026

No more clunks or creaks from the front end. This kit totally solved my suspension issues. It was an easy install and the difference is amazing.

Kelly_SUV_Life_591

02/01/2026

Solid parts, feel very well-made. The price was great too, especially considering you get the whole set. My Jeep handles like it's new again.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.