PHILTOP Front Upper Control Arm for Tundra 2000-2006, 101023 Suspension Arms for 2-4'' lift, 2Pcs

PHILTOP Front Upper Control Arm for Tundra 2000-2006, 101023 Suspension Arms for 2-4'' lift, 2Pcs

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3902CAK1470US

Specifications

Brand
PHILTOP
Items Included
2x Front Upper 2-4" Control Arm
Quantity
2
Position
Front Upper
Surface Finish
Polished, Rust Protected
Material
Steel
Warranty Period
2-Year

Highlights

  • #63,793 in Automotive (See Top 100 in Automotive)
  • #138 in Automotive Replacement Control Arms
  • Fitment&OE Number:The control arm fit for Tundra 2000-2006.OE Number:101023.Please check fitment for accurate information before purchasing!
  • Kit Includes:2 x Heavy Duty Upper Control Arms.The Suspension Control Arms can used for long time.If you have any question, please contract us by email.We will reply within 24 hours.
  • Material:The high quality steel promotes a longer service life.The high-strength steel body makes it more stable during operation. All parts are rigorously tested to provide reliable replacement.
  • Comfort:Control arm effectively help reduce the road noise and vibration, enabling you to enjoy a smooth and controlled ride during cornering and over bumps.Reasonable structural design provide better driving performance of off-road.
  • Easy to Install:Precision tolerances for easy installation and steering alignment giving you a perfect fit for quiet operation to assure they meet or often exceed OEM quality.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2001 - 20072001 - 20072000 - 20042005 - 20062005 - 20062000 - 20062000 - 20042005 - 20062000 - 2006
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelSequoiaSequoiaTundraTundraTundraTundraTundraTundraTundra
TrimLimitedSR5BaseBaseBaseLimitedSR5SR5SR5
Engine4.7L V84.7L V83.4L V64.0L V64.7L V84.7L V83.4L V64.0L V64.7L V8
Note
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension
Only suitable for cars w/ raised suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.6/5

Based on 13 reviews

569%
423%
38%
20%
10%

CarGuy_John_122

01/13/2026

Putting these on my Tundra was surprisingly easy. All the holes lined up perfectly, and it didn't take too long at all. Much better than the old ones.

Jennifer_Auto_991

11/13/2025

These upper control arms look really good and feel heavy-duty. The price is fantastic for the quality you're getting. Huge upgrade for my Tundra.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.