PHILTOP Front Upper Control Arms Fit for Accord 2003-2007, TSX 2004-2008, Control Arms w/Ball Joints K80228 K620616 K620617

PHILTOP Front Upper Control Arms Fit for Accord 2003-2007, TSX 2004-2008, Control Arms w/Ball Joints K80228 K620616 K620617

Ball Joint Included

Corrosion Resistant

Deformation Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7086CAK3729US

Specifications

Brand
PHILTOP
Items Included
2x Front Lower Ball Joints Assembly - K80228 1x Front Upper Right Control Arm + Ball Joint Asembly - K620616 1x Front Upper Left Control Arm + Ball Joint Assembly - K620617
Quantity
4
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
51215SDAA02,51460SDAA01,51450SDAA01,51210SDAA02,51460SECA01,51450SECA01,51210SDAA01,51460SDAA21,51460SDAA13,51450SDAA21,51450SDAA13,51460SDAA12,51450SDAA11,51450SDAA12,51460SDAA11
Part Number
K80228,RK620617,RK620616,MK80228

Highlights

  • #3,427,411 in Automotive (See Top 100 in Automotive)
  • #26,333 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Control Arms w/Ball Joints for Accord 2003-2007, TSX 2004-2008.
  • Package Contents: 2x Front Lower Ball Joints - K80228, 1x Front Upper Right Control Arm + Ball Joint Passenger Side - K620616, 1x Front Upper Left Control Arm + Ball Joint Driver Side - K620617.
  • OE NUMBER: K80228 K620616 K620617.The control arms are OE compliant which makes installation easy.
  • Improved Driving Safety: The stability and controllability of the control arms are important for driving safety. The new control arm reduces rollover and loss of control at high speeds or during emergency braking.
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20082003 - 20052003 - 20072003 - 2007200720072005 - 20072003 - 20072003 - 2007200620052005200720072006 - 2007
MakeAcuraHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseDXEXEXEX-LEX-LHybridLXLXLX Special EditionSESESpecial EditionSpecial EditionValue Package
Engine2.4L L42.4L L42.4L L43.0L V62.4L L43.0L V63.0L V62.4L L43.0L V62.4L L42.4L L43.0L V62.4L L43.0L V62.4L L4
Note---------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

5.0/5

Based on 6 reviews

5100%
40%
30%
20%
10%

Jecqael WalkerJecqael Walker

07/24/2024

Verified buyer

Everything is good no damage highly recommended

Ashley Wilson

05/18/2023

Verified buyer

These upper control arms fit perfectly on my 2007 tundra 4x4. They are relatively beefy with a great price.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.