Fitment: PHILTOP Front Upper Control Arms for 300 2005-2019, Challenger 2008-2018, Charger 2006-2019, Magnum 2005-2008.
Package Contents: 1x Front Right Upper Control Arm W, Ball Joint (Passenger Side) - K620178; 1x Front Left Upper Control Arm W, Ball Joint ( Driver Side) - K620177.
Tips: Please check that the control arm is suitable for your vehicle by "Suncentautoconfirmedfit" before purchasing.
Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life.
Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple.
Confirm the installation side, mounting points and ball-joint configuration.
Inspect the new control arm, bushings, ball joint and dust boot for damage.
Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
Step-1: Raise and support the vehicle, then remove the wheel.
Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
Step-5: Position the new arm and hand-start all fasteners.
Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
Confirm all fasteners and locking components are secure.
Check that the wheel rotates freely without interference.
Perform a short, low-speed road test and check for noise, pulling or unstable steering.
A professional four-wheel alignment is required after installation.
Recheck the installation after the first 50–100 km.
Product Video
Product Description
Reviews
5.0/5
Based on 1 review
5
100%
4
0%
3
0%
2
0%
1
0%
M
Marcella
11/26/2024
Verified buyer
I recently installed the PHILTOP Front Upper Control Arms kit on my 2008 Charger, and I couldn't be happier with the results. The kit was comprehensive, including all the necessary parts for a complete suspension upgrade. The increased stability and improved steering response are noticeable, making my drives more enjoyable. The quality of the parts is top-notch, and the direct fit design made installation a breeze. Highly recommended for anyone looking to enhance their vehicle's performance and comfort. Read more
FAQS
Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.
We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
PHILTOP Front Upper Control Arms Fit for Chrysler 300 2005-2019, Challenger 2008-2018, Charger 2006-2019, Magnum 2005-2008, 2PCS
Ball Joint Included
Corrosion Resistant
Deformation Resistant
SKU:
4207CAK143PUS
5.0
$58.14$5814
Check if this fits your vehicle
Select a vehicle to check this product.
Items Included
1x Front Upper Control Arm W/ Ball Joint Assembly - Driver Side - K620177 1x Front Upper Control Arm W/ Ball Joint Assembly - Passenger Side - K620178
Quantity
2
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
#23,981 in Automotive (See Top 100 in Automotive)
#45 in Automotive Replacement Control Arms
Fitment: PHILTOP Front Upper Control Arms for 300 2005-2019, Challenger 2008-2018, Charger 2006-2019, Magnum 2005-2008.
Package Contents: 1x Front Right Upper Control Arm W, Ball Joint (Passenger Side) - K620178; 1x Front Left Upper Control Arm W, Ball Joint ( Driver Side) - K620177.
Tips: Please check that the control arm is suitable for your vehicle by "Suncentautoconfirmedfit" before purchasing.
Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life.
Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple.
Confirm the installation side, mounting points and ball-joint configuration.
Inspect the new control arm, bushings, ball joint and dust boot for damage.
Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
Step-1: Raise and support the vehicle, then remove the wheel.
Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
Step-5: Position the new arm and hand-start all fasteners.
Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
Confirm all fasteners and locking components are secure.
Check that the wheel rotates freely without interference.
Perform a short, low-speed road test and check for noise, pulling or unstable steering.
A professional four-wheel alignment is required after installation.
Recheck the installation after the first 50–100 km.
Product Video
Product Description
Reviews
5.0/5
Based on 1 review
5
100%
4
0%
3
0%
2
0%
1
0%
M
Marcella
Nov 26,2024
Verified buyer
I recently installed the PHILTOP Front Upper Control Arms kit on my 2008 Charger, and I couldn't be happier with the results. The kit was comprehensive, including all the necessary parts for a complete suspension upgrade. The increased stability and improved steering response are noticeable, making my drives more enjoyable. The quality of the parts is top-notch, and the direct fit design made installation a breeze. Highly recommended for anyone looking to enhance their vehicle's performance and comfort. Read more
FAQS
Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.
We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.
PHILTOP Front Upper Control Arms Fit for Chrysler 300 2005-2019, Challenger 2008-2018, Charger 2006-2019, Magnum 2005-2008, 2PCS