2003-2005 Mercury Grand Marquis 4.6L V8 | 2 PC Front Wheel Bearing | 3W1Z1104AA/513196 - PHILTOP

2003-2005 Mercury Grand Marquis 4.6L V8 | 2 PC Front Wheel Bearing | 3W1Z1104AA/513196 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4554WBR238RUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513196,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.4 in
Wheel Stud Size
1/2"x20 Unf
Flange Offset
1.48 in/37.5 mm
Flange Diameter
5.94 in/151.0 mm
Brake Pilot Diameter
2.82 in/71.6 mm
Warranty Period
2-Year
OE Number
3W1Z1104AA,3W132B663BA,3W132B663BB,5W132B663BA,3W1Z2C204BB,3W1Z2C204BA,3W1Z2C204AA,5W1Z1104B,3W1Z1104BA
Part Number
513196,WE61527,40761004E,BR930506,H513196,713196,HUB19,BR930306,114196,WA513196,951905,WH513196,29513196,PT513196,7250087,102036,BAR5006D,BAR5006B,NT513196,40761004,141149148,FW9196,49148,HA513196,HZF179BS3B,53036506
Quantity
2

Highlights

  • Fitment: Front Wheel Bearing Hub Assembly fits Grand Marquis 2003-2005, Town Car 2003-2005, Crown Victoria 2003-2005, Marauder 2003-2004.
  • Note: Select your vehicle's “Year, Make, Model” and click on “Check Fit” to make sure it fits your car, or check the product page instructions to make sure the wheel hub assemblies are an exact match.
  • Durable and Long-lasting: Our wheel bearings are made of high-quality materials and are therefore hard, flexible and wear-resistant. This significantly extends the service life of the wheel hub assembly. In addition, the wheel hubs are tested and comply with OE standards.
  • Restoring Vehicle Performance:Replacing the wheel hub bearings with new ones will solve the problem of rattling and wobbling of the vehicle. Our wheel bearing assemblies ensure your driving safety and experience.
  • Installation Advice: Although the wheel bearings conform to the original factory design, it is still recommended that you seek the help of a professional mechanic or refer to a specialized installation manual.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 200420052003 - 200420052003 - 20042005200420052003 - 200420052003 - 200420052005200320032003 - 200420052003 - 200420052003200420052003 - 2004200520052005200420042003 - 2004200520052003 - 200420052003200520052003 - 2004
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercury
ModelCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarTown CarGrand MarquisGrand MarquisGrand MarquisGrand MarquisGrand MarquisGrand MarquisGrand MarquisGrand MarquisMarauder
TrimBaseBaseLWBLWBLXLXLX SportLX SportPolice InterceptorPolice InterceptorSSSpecial EditionCartierCartier LExecutiveExecutiveExecutive LExecutive LExecutive Protection SeriesProtection SeriesProtection SeriesSignatureSignatureSignature LSignature LimitedUltimateUltimate LGSGSGSLLSLSLSELimited EditionUltimate EditionBase
Engine4.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V8
Note-
Thru 2/22/2005
-
Thru 2/22/2005
-
Thru 2/22/2005
-
Thru 2/22/2005
-
Thru 2/22/2005
-
Thru 2/22/2005
Thru 2/22/2005
---
Thru 2/22/2005
-
Thru 2/22/2005
--
Thru 2/22/2005
-
Thru 2/22/2005
Thru 2/22/2005
Thru 2/22/2005
---
Thru 2/22/2005
Thru 2/22/2005
-
Thru 2/22/2005
-
Thru 2/22/2005
Thru 2/22/2005
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

Ashley_RoadTrip_702

01/30/2026

My Marauder was making a humming noise that was driving me crazy. Replaced the hub with this part, and it's quiet as a mouse now. Huge relief.

Kelly_SUV_Life_465

10/17/2025

The quality of these bearings is really impressive, especially considering how affordable they are. Feels like I got a great deal and a solid part.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.