2002-2011 Toyota Camry 2.4L L4 | 1 PC Ignition Coil | UF333 - PHILTOP

2002-2011 Toyota Camry 2.4L L4 | 1 PC Ignition Coil | UF333 - PHILTOP

Quick Ignition Response

High-Grade Insulation

Built to Last

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8386IGC149MUS

Specifications

Brand
PHILTOP
Items Included
1x Ignition Coil - UF333
Type
Pen-Type
Quantity
1
Color
Black
Pin Count
4
Warranty Period
2-Year
Part Number
UF333

Highlights

  • [Premium Quality] PHILTOP ignition coils use the highest-grade materials which makes our product durable and reliable under extreme conditions. They are providing high electrical Resistance, strong spark from plugs, and being resistant to corrosion and abrasion
  • [Vehicle Fitment] Compatible with Camry 2002-2011, RAV4 2001-2008, Scion tC 2005-2010, Scion xB 2011-2015, Camry 2002-2011, Highlander 2001-2007, Matrix 2009-2013, Solara 2002-2006, RAV4 2001-2008, Vibe 2009-2010, HS250h 2010-2012, Vibe 2009-2010, Scion xB 2011-2015, Corolla 2009-2010, Corolla 2009-2010, Matrix 2009-2013, Highlander 2001-2007, Solara 2002-2006, Scion tC 2005-2010, HS250h 2010-2012
  • [OE Design] OE Replacement Ignition Coil. Reference Number#: UF322, 90919-02244, C1330, 6731307
  • [Easy Installation] Ignition coil is OE design which makes it easy to install. Please use professional tools for removal and installation. Professional installation is recommended to ensure structural integrity
  • [Note] While replacing the ignition coil, it is also necessary to pay attention to the condition of the spark plug. Use of an aging spark plug will affect the life of the ignition coil

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122010 - 20122009 - 20102009 - 20102009 - 20102005 - 20102011 - 20162007 - 20082010 - 20152005 - 200620092007 - 20082007 - 20092010 - 2011200220032004 - 2009200220032004 - 2009200220032004 - 20092009 - 20102001 - 20072009 - 201020132009 - 20102001 - 20032004 - 200820052006 - 20082005 - 20082002 - 200620062004 - 2006
MakeLexusLexusPontiacPontiacPontiacScionScionScionScionToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelHS250hHS250hVibeVibeVibetCtCtCxBCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCorollaHighlanderMatrixMatrixMatrixRAV4RAV4RAV4RAV4RAV4SolaraSolaraSolara
TrimBasePremiumAWDBaseGTBaseBaseSpecBaseBaseBaseCEHybridHybridLELELESESESEXLEXLEXLEXRSBaseSSXRSBaseBaseLLimitedSportSESE SportSLE
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.5L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.0L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L4
Note--
Built In Japan
Built In Japan
Built In Japan
---
Built In Japan; w/ 3.875Inch Coil Stem
Built In Japan
Built In Japan
Built In Japan
Built In Japan
Built In Japan; Built In USA
Built In USA
Built In Japan; Built In USA
Built In Japan
Built In USA
Built In Japan; Built In USA
Built In Japan
Built In USA
Built In Japan; Built In USA
Built In Japan
Built In Japan
Built In Japan
Built In Japan
Built In Japan
Built In Japan
-----
Built In Japan
Built In Japan
Built In Japan

How to Install?

Installation Manual Download

User manual (PDF)
Download

Related Diagnostic Codes

  • P0300-Random/multiple-cylinder misfire — inspect the spark plugs, ignition coils, wiring and fuel system.
  • P0301–P0306-Specific-cylinder misfire — inspect the plug, coil and wiring for the indicated cylinder.
  • P0350-Ignition-coil primary/secondary circuit fault — check coil resistance, connectors and wiring.
  • P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.

Checks Before Installation

  • Confirm the ignition coils and spark plugs match the vehicle and original parts.
  • Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
  • Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
  • Check the spark-plug wells for oil, carbon deposits or debris.
  • Allow the engine to cool completely before removing the spark plugs.
  • Confirm the specified spark-plug gap and installation torque in the vehicle service manual.

Installation Steps

  • Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
  • Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
  • Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
  • Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
    Gasket seat and tapered seat spark plugs compared

    Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.

    Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.

  • Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.

Spark Plug Torque Reference

Spark Plug ThreadRecommended Torque
18 mm (M18)35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket10–20 N·m (7.4–14.8 lb-ft)

Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.

After Installation

  • Clear historical fault codes with an OBD-II scanner.
  • Start the engine and let it idle for several minutes.
  • Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
  • Check that the malfunction indicator light remains off.
  • Perform a short road test, then rescan for returned fault codes.

Product Video

Product Description

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

Mike from Texas_564

08/19/2025

Was having some rough idle issues with my old Camry. Swapped these coils in and problem solved! The idle is steady now, and the engine feels much more responsive.

Lisa_CivicDriver_851

01/03/2026

For the price, these ignition coils are fantastic. They feel really well-built and have performed flawlessly so far. My Scion tC is running like it's brand new.

FAQS

Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.

Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.