2010-2013 Land Rover Range Rover Sport 5.0L V8 | 8 PC Ignition Coil | LR010687/UF618 - PHILTOP

2010-2013 Land Rover Range Rover Sport 5.0L V8 | 8 PC Ignition Coil | LR010687/UF618 - PHILTOP

Quick Ignition Response

High-Grade Insulation

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5944IGC188AUS

Specifications

Brand
PHILTOP
Items Included
8x Ignition Coil - UF618
Type
Pen-Type
Quantity
8
Color
Black
Pin Count
3
Warranty Period
2-Year
OE Number
LR010687,AJ811378
Part Number
UF618,GN10591,C877,48753,U5236,E1118,SKIC158,U5286,5C1844,C1787,221604022,1788512,E1137,C887,IC740,174203,5158,3307350303715382,3312467757248953,IC740SB,IC721SB,CE226,E1118P,SC1844

Highlights

  • [Premium Quality] PHILTOP ignition coils use the highest-grade materials which makes our product durable and reliable under extreme conditions. They are providing high electrical Resistance, strong spark from plugs, and being resistant to corrosion and abrasion
  • [Vehicle Fitment] Compatible with Range Rover Sport 2010-2013, Range Rover 2010-2013, LR4 2010-2013, XF 2010-2012, XJ 2010-2012, XKR 2010-2012, XK 2010-2012, XFR 2010-2012, XKR-S 2012
  • [OE Design] OE Replacement Ignition Coil. Reference Number#: UF618, AJ811378, LR010687, UF637
  • [Easy Installation] Ignition coil is OE design which makes it easy to install. Please use professional tools for removal and installation. Professional installation is recommended to ensure structural integrity
  • [Note] While replacing the ignition coil, it is also necessary to pay attention to the condition of the spark plug. Use of an aging spark plug will affect the life of the ignition coil

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 201220122010 - 20112010 - 20122010 - 20122010 - 20122010 - 201120122010 - 20122010 - 20122010 - 20122010 - 20122010 - 20122010 - 201220122011 - 20132010 - 20132012 - 2013201020122010 - 201220122010 - 20122011 - 20132011201320122010 - 20132012 - 20132010 - 2013
MakeJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarJaguarLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand RoverLand Rover
ModelXFXFXFXFXFRXJXJXJXJXJXJXJXKXKRXKR-SLR4LR4LR4LR4Range RoverRange RoverRange RoverRange RoverRange Rover SportRange Rover SportRange Rover SportRange Rover SportRange Rover SportRange Rover SportRange Rover Sport
TrimBasePortfolioPremiumSuperchargedBaseBaseLL PortfolioL SuperchargedL SupersportSuperchargedSupersportBaseBaseBaseBaseHSEHSE LuxV8AutobiographyHSEHSE LuxSuperchargedAutobiographyGT Limited EditionGT Limited EditionGT Limited Edition 3HSEHSE LuxSupercharged
Engine5.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V85.0L V8
Note
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
Alternate Number
---------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Related Diagnostic Codes

  • P0300-Random/multiple-cylinder misfire — inspect the spark plugs, ignition coils, wiring and fuel system.
  • P0301–P0306-Specific-cylinder misfire — inspect the plug, coil and wiring for the indicated cylinder.
  • P0350-Ignition-coil primary/secondary circuit fault — check coil resistance, connectors and wiring.
  • P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.

Checks Before Installation

  • Confirm the ignition coils and spark plugs match the vehicle and original parts.
  • Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
  • Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
  • Check the spark-plug wells for oil, carbon deposits or debris.
  • Allow the engine to cool completely before removing the spark plugs.
  • Confirm the specified spark-plug gap and installation torque in the vehicle service manual.

Installation Steps

  • Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
  • Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
  • Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
  • Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
    Gasket seat and tapered seat spark plugs compared

    Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.

    Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.

  • Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.

Spark Plug Torque Reference

Spark Plug ThreadRecommended Torque
18 mm (M18)35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket10–20 N·m (7.4–14.8 lb-ft)

Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.

After Installation

  • Clear historical fault codes with an OBD-II scanner.
  • Start the engine and let it idle for several minutes.
  • Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
  • Check that the malfunction indicator light remains off.
  • Perform a short road test, then rescan for returned fault codes.

Product Video

Product Description

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Ashley_RoadTrip_461

09/19/2025

The build quality on these coils feels really solid. They look and feel just like the OEM parts, but at a fraction of the cost. My Rover is running smoother than it has in years, huge value for money here.

SarahDrives_437

05/28/2025

My Range Rover was sputtering pretty bad, felt like it was losing power. Swapped these out and it's running like a champ again. Way better than I expected for the price.

FAQS

Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.

Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.