PHILTOP K640289 K640290 Front Lower Control Arms For TSX 2004 2005 2006 2007 2008, Accord 2003 2004 2005 2006 2007, 2pcs

PHILTOP K640289 K640290 Front Lower Control Arms For TSX 2004 2005 2006 2007 2008, Accord 2003 2004 2005 2006 2007, 2pcs

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6356CAK0516US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm - Passenger Side - K640289 1x Front Lower Control Arm - Driver Side- K640290
Quantity
2
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
51360SEAE01,51350SEAE01,51350SEAA01,51360SEAA01,51360SDAA01,51350SDAA03,51360SDAA03,51360SDBA00,51350SDBA00,51350SDAA01,51360SDBA10,51360SDAA02,51350SDBA10,51350SDAA02
Part Number
RK640289,RK640290,TC2427,TC2428,K640289,K640290,CK640290,CK640289,1025288,1025287,GS20406,GS20407,JTC1806,HNH228,JTC1807,HNH227

Highlights

  • (Vehicle Fitment)PHILTOP control arms kit Fit for TSX 2004-2008, Accord 2003-2007.
  • (Kit Included)1x K640289 Front Lower Control Arm (Passenger), 1x K640290 Front Lower Control Arm (Driver)
  • (High-Quality)The control arm kit is made of high-quality materials and environmentally friendly anti-corrosion paint, and is treated with anti-rust treatment at the factory to improve corrosion resistance and extend service life. Excellent steel body and rubber bushings can effectively cushion vehicle vibration and reduce noise, providing better driving performance.
  • (Strictly Tested)All control arm components undergo a variety of rigorous tests at the factory, including aging, durability, and hardness tests.PHILTOP's control arm kits meet the stringent requirements of most cars, trucks, and SUVs.
  • (Installation)Our control arm suspension kits are calibrated to meet code requirements. The control arm is easy to install and no special tools are required for installation.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20082003 - 20052003 - 20072003 - 2007200720072005 - 20072003 - 20072003 - 2007200620052005200720072006 - 2007
MakeAcuraHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseDXEXEXEX-LEX-LHybridLXLXLX Special EditionSESESpecial EditionSpecial EditionValue Package
Engine2.4L L42.4L L42.4L L43.0L V62.4L L43.0L V63.0L V62.4L L43.0L V62.4L L42.4L L43.0L V62.4L L43.0L V62.4L L4
Note---------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Lisa_CivicDriver_417

03/13/2026

My car was making some weird noises and the steering felt off. After installing these, it's like a whole new car! The ride is smooth and quiet again, totally fixed the problem.

RickFixIt_554

10/15/2025

Got these control arms for my Accord and wow, they arrived super fast! Installation was a breeze, didn't have any issues at all. Definitely recommend if you need parts in a hurry.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.