PHILTOP K641543 Front Lower Control Arms Control Arms and Ball Joint Suspension Kit For TL 2004-2006, 4pcs

PHILTOP K641543 Front Lower Control Arms Control Arms and Ball Joint Suspension Kit For TL 2004-2006, 4pcs

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8790CAK066KUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm Assembly - Driver Side - K641543 1x Front Lower Control Arm Assembly - Passenger Side - K641544 2x Front Lower Ball Joints - K500117
Quantity
4
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
51350SEPA00,51360SEPA00,51210SEPA01,51210SEPA11,51215SEPA01,51215SEPA11
Part Number
K500117,RK641544,RK641543,TC5074,TC5571,TC5572,CK641544,GS601021,GS601022,CA50053PR,CA50054PR,JTC2726

Highlights

  • (Vehicle Fitment)PHILTOP control arms kit Fit for TL 2004 2005 2006
  • (Kit Included)Control arm kit included: 1x Front Lower Control Arm Assembly - Driver Side - K641543, 1x Front Lower Control Arm Assembly - Passenger Side - K641544, 2x Front Lower Ball Joints - K500117
  • (Installation)Our control arm suspension kits are calibrated to meet specifications.Control arms are easy to install with simple hand tools in just a few minutes - no special tools required for installation.
  • (High-Quality)The control arm kit is made of high-quality materials and environmentally friendly anti-corrosion paint, and is treated with anti-rust treatment at the factory to improve corrosion resistance and extend service life. Excellent steel body and rubber bushings can effectively cushion vehicle vibration and reduce noise, providing better driving performance.
  • (Verify Reminder)Please use Suncentauto's vehicle matching tool, which is located at the top of the list above the picture on your desktop, to confirm that the part is correct for your vehicle.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 2006
MakeAcura
ModelTL
TrimBase
Engine3.2L V6
Note-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Kelly_SUV_Life_988

01/01/2026

It’s like I have a new car! The old control arms were worn out and causing a rough ride. These fixed everything, and my TL is stable and quiet again. Big improvement.

Tom_Handy_393

03/21/2026

For the price, these are fantastic. They feel really solid and well-constructed. My TL handles much better on the highway and around corners now. A solid upgrade.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.