PHILTOP K80726 Front Lower Right Control Arms with Ball Joint Fit for Mustang 2005 2006 2007 2008 2009 2010 Suspension Kit

PHILTOP K80726 Front Lower Right Control Arms with Ball Joint Fit for Mustang 2005 2006 2007 2008 2009 2010 Suspension Kit

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5850CAK341JUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Lower Right Control Arm with Ball Joint Assembly - K80726
Quantity
1
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
4R3Z3078B,MCF2364,7R3Z3078A,6R3Z3078AA,6R3Z3078A,9R3Z3078B,4R3Z3078A,AR3Z3078B,9R3Z3078A,AR3Z3078D,4R3Z3078BA,AR3Z3078A,7R3Z3078S,7R3Z3078R
Part Number
RK80726,TC5770,GK80726,CB85324PR

Highlights

  • #245,746 in Automotive (See Top 100 in Automotive)
  • #1,276 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Control Arms Lower Ball Joints Sway Bars Tie Rods for M-u-sta-n-g 2005-2010.
  • Package Contents: 1x Front Lower Right Control Arm with Ball Joint.
  • OE NUMBER: Control Arms Lower Ball Joints Sway Bars Tie Rods K80726.
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly.
  • Simple Installation: Our control arms meet production standards and are dimensionally accurate. This makes installation simple and requires no additional action.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20102008 - 20092005 - 20102007 - 20082007 - 20102008 - 2009
MakeFordFordFordFordFordFord
ModelMustangMustangMustangMustangMustangMustang
TrimBaseBullittGTShelby GTShelby GT500Shelby GT500KR
Engine4.0L V64.6L V84.6L V84.6L V85.4L V85.4L V8
Note
To 08/2/2009
To 08/2/2009
To 08/2/2009
To 08/2/2009
To 08/2/2009
To 08/2/2009

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 8 reviews

575%
425%
30%
20%
10%

Tom_Handy_167

04/26/2026

Installation was a breeze, everything lined up perfectly. And the delivery was super fast, arrived two days earlier than expected.

Tom_Handy_172

01/18/2026

Nice solid construction on these. Feel like they'll last a long time, and the price point is excellent for the quality.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.