1999-2004 Ford Mustang 3.8L V6/3.9L V6 | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M390518 - PHILTOP

1999-2004 Ford Mustang 3.8L V6/3.9L V6 | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M390518 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2302BMC026MUS

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
2
Rearward Outlet Size
M10 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M390518
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M390518

Highlights

  • (FITMENT)This brake master cylinder compatible with Mustang 1999-2004.
  • (OE REPLACEMENT NUMBER)This brake master cylinder OE part number#: ‎M390518, 133019, F9ZZ2140DA, F9ZZ 2140-DA.
  • (Specifications) Material: Aluminum; Master Cylinder Bore Diameter: 1 inch/25.4 mm; Number of Outlets: 2; Rearward Outlet Size: M10 x 1.0; Reservoir Included: Yes; Sensor Included: No; Mounting Hardware Included: NO.
  • (100% NEW AND PRECISE REPLACEMENT)This brake master cylinder is made from brand new materials and is not a remanufactured product to ensure high quality and safety; the cylinder housing is constructed to match the casting material of the original part to ensure fitment to your car.
  • (SAE INTERNATIONAL STANDARDS)All rubber parts of this brake master cylinder are made of high-quality EPDM composite material, which is resistant to glycol brake fluid corrosion and meets stringent SAE International standards.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20042004
MakeFordFord
ModelMustangMustang
TrimBaseBase
Engine3.8L V63.9L V6
Note
Bore: 1 In.;Traction Control
Bore: 1 In.;Traction Control

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

11

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Joe patterson

11/03/2024

Verified buyer

Perfect fit for the '02 jeep wrangler sahara 4.0. Has worked as it should since installed Read more

RickFixIt_552

01/09/2026

Arrived quickly and was a perfect fit for my Mustang. Installation was pretty easy, and the brakes feel great now. Happy with the fast shipping and good quality part.

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Use the brake fluid type specified by the vehicle manufacturer. Keep the fluid clean and avoid leaving the reservoir open longer than necessary.

The system normally requires bleeding after the hydraulic lines are opened. The correct sequence and method vary by vehicle, and some ABS systems may require a scan tool.