1995-1997 Honda Odyssey 2.2L | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M39970 - PHILTOP

1995-1997 Honda Odyssey 2.2L | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M39970 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1649BMC160PUS

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
2
Rearward Outlet Size
M12 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M10 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M39970
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M39970

Highlights

  • [Vehicle Fitment]: PHILTOP Brake Master Cylinder Compatible with Honda Accord 1991-1997 2.2L, Honda Odyssey 1995-1997, Honda Accord 1995-1997 2.7L, Honda Prelude 1992-1996 2.3L, Acura CL 1997, Acura Vigor 1992-1994, Honda Prelude 1993-1996 2.2L, Acura TL 1996 2.5L, Isuzu Oasis 1996-1997, Acura TL 1995.
  • [Reference Number]: PHILTOP Brake Master Cylinder Assembly Replacement for: M39970,46100SS0A53,46100SS0A51,8862030580,8862055090,M399708,46100SM4G54,46100SM4G53,46100SM4G52,46100SS0A52.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Specifications]: ①Condition: New; ②Reservoir Included: Yes; ③Material: Aluminium; ④Master Cylinder Bore Diameter: 1(IN); ⑤Number of Outlets: 2; ⑥Rearward Outlet Size: M12 x 1.0; ⑦Sensor Included: Yes.
  • [Note]: Please check the “Suncentauto Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year19971997199719971995 - 19961995 - 19961992 - 19941992 - 199419931994 - 19951991 - 19971995 - 19971994 - 19971995 - 1997199119931995 - 19971995 - 199719951992 - 19961992 - 19941993 - 19961996 - 19971996 - 1997
MakeAcuraAcuraAcuraAcuraAcuraAcuraAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaIsuzuIsuzu
ModelCLCLCLCLTLTLVigorVigorAccordAccordAccordAccordAccordAccordAccordAccordOdysseyOdysseyPreludePreludePreludePreludeOasisOasis
TrimBaseBasePremiumPremiumBasePremiumGSLS10th AnniversaryDXEXEXLXLXSESEEXLXSESiSi 4WSVTECLSS
Engine2.2L L43.0L V62.2L L43.0L V62.5L L52.5L L52.5L L52.5L L52.2L L42.2L L42.2L L42.7L V62.2L L42.7L V62.2L L42.2L L42.2L L42.2L L42.3L L42.3L L42.3L L42.2L L42.2L L42.2L L4
Note
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
-
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
-
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

11

Reviews

5.0/5

Based on 8 reviews

5100%
40%
30%
20%
10%

Customer photos and videos

Emanuel

07/18/2025

Verified buyer

Worked for what I needed it for! I just needed the brake master cylinder reservoir replaced cause my oem one cracked so I took off the new part and put it on the oem. Just that the bore size is a bit smaller on the new one but I was able to use a heat gun to heat it up a bit and it fit on the oem one perfectly.

DAVE WILSON

12/15/2025

Verified buyer

Perfect fit

FAQS

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.