2013-2019 Ford Escape 2.5L/1.5L/1.6L/2.0L | 1 in Brake Master Cylinder w/o Sensor | M630736 - PHILTOP

2013-2019 Ford Escape 2.5L/1.5L/1.6L/2.0L | 1 in Brake Master Cylinder w/o Sensor | M630736 - PHILTOP

Sensor Not Included

Leak-Resistant Seal

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6642BMC2474US

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
2
Rearward Outlet Size
M14 X 1.0
Reservoir Included
No
Secondary Outlet Thread Size
M14 X 1.0
Sensor Included
No
Items Included
1x Master Cylinder - M630736
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630736

Highlights

  • [Vehicle Fitment]: PHILTOP Brake Master Cylinder Compatible with Ford Escape 2013-2019, Ford Focus 2012 2014 2016-2017 2.0L, Ford Focus 2015 1.0T.
  • [Reference Number]: PHILTOP Brake Master Cylinder Assembly Replacement for: M630736,BV6Z2140A,EV6Z2140A.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Specifications]: ①Condition: New; ②Reservoir Included: No; ③Material: Aluminium; ④Master Cylinder Bore Diameter: 1(IN); ⑤Number of Outlets: 2; ⑥Rearward Outlet Size: M14 x 1.0; ⑦Sensor Included: No.
  • [Note]: Please check the “Suncentauto Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 201620172018 - 201920172018 - 20192013 - 20162013 - 201620172018 - 20192015 - 20162018 - 2019201320132018 - 201920172014 - 20162013 - 201620172018 - 2019201220142016 - 20172015201220142016 - 201720122017201220142016 - 2017
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeFocusFocusFocusFocusFocusFocusFocusFocusFocusFocusFocusFocus
TrimSSSSESESESESESESESELSELSELSELTitaniumTitaniumTitaniumTitaniumTitaniumSSSSESESESESELSELTitaniumTitaniumTitanium
Engine2.5L L42.5L L42.5L L41.5L L41.5L L41.6L L42.0L L42.0L L42.0L L42.5L L41.5L L41.6L L42.0L L42.0L L41.5L L41.6L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L41.0L L32.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L4
Note
Bore: 1 In.
w/o Stop/Start System
-
w/o Stop/Start System
-
Bore: 1 In.
Bore: 1 In.
w/o Stop/Start System
-
Bore: 1 In.
-
Bore: 1 In.
Bore: 1 In.
-
w/o Stop/Start System
Bore: 1 In.
Bore: 1 In.
w/o Stop/Start System
-
Bore: 1 In.;To 07/30/2012
Bore: 1 In.;To 03/23/2014
--
Bore: 1 In.;To 07/30/2012
Bore: 1 In.;To 03/23/2014
-
Bore: 1 In.;To 07/30/2012
-
Bore: 1 In.;To 07/30/2012
Bore: 1 In.;To 03/23/2014
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

11

Reviews

5.0/5

Based on 3 reviews

5100%
40%
30%
20%
10%

Andrés castro

04/26/2026

Verified buyer

Dejar en la puerta de adentro apt #2

Jason_Trucks_73

12/27/2025

Lightning fast shipping, got here in just two days! Installation was a breeze, everything fit exactly as it should. My brakes are working perfectly.

FAQS

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Before driving, press the brake pedal firmly several times until it feels firm, to seat the pads against the rotor.Confirm secure fittings, correct fluid level, no leakage, a stable pedal, normal warning-light status, and proper brake response before normal driving.

Remaining air, an external leak, incorrect pushrod clearance, flexible hose expansion, caliper issues, or an ABS bleeding requirement may contribute to a soft pedal.