2013-2017 Honda Accord 2.4L | 1.6KW 9-Tooth Starter | 10915N - PHILTOP

2013-2017 Honda Accord 2.4L | 1.6KW 9-Tooth Starter | 10915N - PHILTOP

Power: 1.6 kW

Pinion Teeth: 9

Quick Starting Response

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8310STM069BUS

Specifications

Brand
PHILTOP
Power
1.6 kW
Pinion Teeth
9
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 10915N 1x Manual
Warranty Period
2-Year
Part Number
10915N

Highlights

  • Vehicle Compatibility: PHILTOP Automotive Replacement Starter Compatible with 2013-2017 Honda Accord 2.4L
  • Starter Specification: ①Power Rating: 1.6KW; ②Voltage: 12V; ③Numer of Teeth: 9; ④Rotation: CW(Clockwise); ⑤Specs for: Mitsuba PMGR
  • OEM Number: 10915N. Please confirm that the starter motor is compatible with your vehicle before placing your order.
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20172013 - 20172013 - 20172013 - 20172013 - 20172017
MakeHondaHondaHondaHondaHondaHonda
ModelAccordAccordAccordAccordAccordAccord
TrimEXEX-LLXLX-SSportSport Special Edition
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L4
Note------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

Lisa_CivicDriver_471

12/19/2025

Solidly built part that doesn't break the bank. You can tell they didn't cut corners on the materials, and it fits like a glove.

Brad_AutoParts_674

01/31/2026

Fast delivery and the packaging was very secure. Swapping it out was easy enough for a DIYer, and the car fired right up on the first try.

FAQS

Proven in extreme temperatures, our starter delivers powerful torque and rapid response. Built with premium field coils and all-copper windings, its compact design ensures reliable operation and extended service life.

Not necessarily. Keep your existing battery if it tests good and holds a charge.

The engine should crank smoothly without grinding. If the starter keeps running after the engine starts, switch off immediately.