OEM Number: 17929、17929N、4606875AE、04606875AE、RX606875AE. Please confirm that the starter motor is compatible with your vehicle before placing your order.
Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
Efficient Quiet: Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance
P0562-Low system voltage:check the battery, cables, and grounds.
P0615-Starter relay circuit fault:check the relay and control wiring.
P0616-Starter relay circuit low:check for wiring damage or a short to ground.
P0617-Starter relay circuit high:check for an open circuit or a short to power.
P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.
Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.
Checks Before Installation
Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
Check the battery: Make sure it is fully charged and the terminals are clean and secure.
Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.
Installation Steps
STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.
After Installation
Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
Switch off the engine and inspect for loose connections or signs of overheating.
Product Video
Product Description
Reviews
4.9/5
Based on 16 reviews
5
88%
4
13%
3
0%
2
0%
1
0%
Customer photos and videos
A
AmazonianAmazonian
04/17/2026
Verified buyer
I picked up this PHILTOP 17929N starter because my 2005 Dodge Stratus 2.7L has been having starting issues lately. It looks like a solid replacement for the original starter on 2004-2006 Chrysler Sebring and Dodge Stratus models with the 2.7L engine.From what I can see in the listing, here are the main details:- Power: 1.2 kW- Voltage: 12 volts- 10 teeth, clockwise rotation- Made with pure copper windings, aluminum housing, and a laminated steel core- Size is about 9.45 x 6.3 x 4.72 inchesIt matches the part numbers I'm looking for: 17929, 17929N, 4606875AE, 04606875AE, and RX606875AE.The description says it's tested to OE standards with good endurance ratings and can handle extreme temperatures and vibration. It also mentions that the copper coils and gears should give quiet starts and help prevent issues like short circuits. That sounds promising for keeping things reliable without breaking the bank.I'm planning to install this soon and will update my review once I get it on the car and see how it performs. If you're dealing with starter problems on a Sebring or Stratus from those years, this one seems worth considering based on the specs.Just make sure to double-check the fitment for your exact vehicle before ordering.
P
PhilipPhilip
04/17/2026
Verified buyer
The media could not be loaded. I ordered and tested this PHILTOP 17929N starter motor for a compatible Chrysler and Dodge 2.7L application, and it performed exactly the way I wanted it to. In my garage, the starter installed properly and engaged strongly right away. That is really what matters most with a part like this. When I replace a starter, I want dependable cranking and a straightforward repair, and this one delivered that for me.What I liked first is that this is positioned as a direct replacement for the listed Sebring and Stratus 2.7L models. That made it feel like a practical repair part instead of something that would require modifications or extra guesswork. The 1.2KW rating and 10 tooth clockwise design matched the intended application, and the unit looked like it was built for the job.Once installed, I tested it several times in my garage, and it cranked the engine with good strength and consistency. The engagement sounded clean, and the starter did what it was supposed to do without hesitation. That gave me confidence in it as a replacement part, especially for an older vehicle where reliable starting is important.Overall, I had a good experience with this PHILTOP starter. It fit the intended application, worked properly upon installation, and tested well in my garage. For the correct Chrysler or Dodge 2.7L vehicle, I think this is a solid replacement starter.
FAQS
Please refer to the picture. Generally,a starter does not include bolts or other accessories. It is recommended to make full use of the existing bolts, screws and other accessories, which can be perfectly matched with the original accessories.
Avoid prolonged or repeated cranking. Follow your vehicle’s recommended starting intervals to prevent overheating.
Slow cranking can also result from low battery charge, poor ground connections, damaged cables, unsuitable engine oil viscosity, or mechanical resistance in the engine. Check these conditions before assuming the replacement starter is faulty.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
OEM Number: 17929、17929N、4606875AE、04606875AE、RX606875AE. Please confirm that the starter motor is compatible with your vehicle before placing your order.
Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
Efficient Quiet: Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance
4.9
16 reviews
5 star: 14
4 star: 2
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
2004 - 2005
Chrysler
Sebring
Base
2.7L V6
-
2004 - 2006
Chrysler
Sebring
GTC
2.7L V6
-
2004
Chrysler
Sebring
LX
2.7L V6
-
2004
Chrysler
Sebring
LXi
2.7L V6
-
2004 - 2006
Chrysler
Sebring
Limited
2.7L V6
-
2005 - 2006
Chrysler
Sebring
TSi
2.7L V6
-
2004 - 2006
Chrysler
Sebring
Touring
2.7L V6
-
2004
Dodge
Stratus
ES
2.7L V6
-
2004 - 2006
Dodge
Stratus
R/T
2.7L V6
-
2004
Dodge
Stratus
SE
2.7L V6
-
2004 - 2006
Dodge
Stratus
SXT
2.7L V6
-
Product Specifications
Brand
PHILTOP
Power
1.2 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
P0562-Low system voltage:check the battery, cables, and grounds.
P0615-Starter relay circuit fault:check the relay and control wiring.
P0616-Starter relay circuit low:check for wiring damage or a short to ground.
P0617-Starter relay circuit high:check for an open circuit or a short to power.
P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.
Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.
Checks Before Installation
Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
Check the battery: Make sure it is fully charged and the terminals are clean and secure.
Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.
Installation Steps
STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.
After Installation
Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
Switch off the engine and inspect for loose connections or signs of overheating.
Product Video
Product Description
Reviews
4.9/5
Based on 16 reviews
5
88%
4
13%
3
0%
2
0%
1
0%
Customer photos and videos
A
AmazonianAmazonian
Apr 17,2026
Verified buyer
I picked up this PHILTOP 17929N starter because my 2005 Dodge Stratus 2.7L has been having starting issues lately. It looks like a solid replacement for the original starter on 2004-2006 Chrysler Sebring and Dodge Stratus models with the 2.7L engine.From what I can see in the listing, here are the main details:- Power: 1.2 kW- Voltage: 12 volts- 10 teeth, clockwise rotation- Made with pure copper windings, aluminum housing, and a laminated steel core- Size is about 9.45 x 6.3 x 4.72 inchesIt matches the part numbers I'm looking for: 17929, 17929N, 4606875AE, 04606875AE, and RX606875AE.The description says it's tested to OE standards with good endurance ratings and can handle extreme temperatures and vibration. It also mentions that the copper coils and gears should give quiet starts and help prevent issues like short circuits. That sounds promising for keeping things reliable without breaking the bank.I'm planning to install this soon and will update my review once I get it on the car and see how it performs. If you're dealing with starter problems on a Sebring or Stratus from those years, this one seems worth considering based on the specs.Just make sure to double-check the fitment for your exact vehicle before ordering.
P
PhilipPhilip
Apr 17,2026
Verified buyer
The media could not be loaded. I ordered and tested this PHILTOP 17929N starter motor for a compatible Chrysler and Dodge 2.7L application, and it performed exactly the way I wanted it to. In my garage, the starter installed properly and engaged strongly right away. That is really what matters most with a part like this. When I replace a starter, I want dependable cranking and a straightforward repair, and this one delivered that for me.What I liked first is that this is positioned as a direct replacement for the listed Sebring and Stratus 2.7L models. That made it feel like a practical repair part instead of something that would require modifications or extra guesswork. The 1.2KW rating and 10 tooth clockwise design matched the intended application, and the unit looked like it was built for the job.Once installed, I tested it several times in my garage, and it cranked the engine with good strength and consistency. The engagement sounded clean, and the starter did what it was supposed to do without hesitation. That gave me confidence in it as a replacement part, especially for an older vehicle where reliable starting is important.Overall, I had a good experience with this PHILTOP starter. It fit the intended application, worked properly upon installation, and tested well in my garage. For the correct Chrysler or Dodge 2.7L vehicle, I think this is a solid replacement starter.
FAQS
Please refer to the picture. Generally,a starter does not include bolts or other accessories. It is recommended to make full use of the existing bolts, screws and other accessories, which can be perfectly matched with the original accessories.
Avoid prolonged or repeated cranking. Follow your vehicle’s recommended starting intervals to prevent overheating.
Slow cranking can also result from low battery charge, poor ground connections, damaged cables, unsuitable engine oil viscosity, or mechanical resistance in the engine. Check these conditions before assuming the replacement starter is faulty.