Universal 0.8KW 10-Tooth Starter | OE#KH-24-098-01 - PHILTOP

Universal 0.8KW 10-Tooth Starter | OE#KH-24-098-01 - PHILTOP

Power: 0.8 kW

Pinion Teeth: 10

Quick Starting Response

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5052STR269BUS

Specifications

Brand
PHILTOP
Power
0.8 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CCW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 6744N 1x Manual
Warranty Period
2-Year
OE Number
228000-7190,6744,8000335,8000869,AM132702,E7194-63010,KH-24-098-01,KH-25-098-11-S,MIA11473,SDR0291

Highlights

  • Starter Compatible with:1993-1994 720K/F6801994-1999 21851995-1999 720K/F680/M653/M655/M665/ZG20F/ZG23F1996-2002 LT21381996-2006 ZG20F/ZG23F1997-2002 Sabre 2554HV1998-2002 Model 350 Mag EFI Ski (TBI)1999-2002 Sabre 1948HV/2148HV/2354HV2000-2002 2166/2176/2186/2206/2518/3204/32352000-2002 Z150/Z253/Z286E/Z350/Z355 Z Master2000-2003 225/725K2000-2006 20002001-2003 2185/3040/3184/3206/M653/M655/M665/Workman 31002001-2006 18002002-2003 Dingo 220/TX-4252002-2003 Z200/Z255/Z288E Z Master2002-2004 Z153/Z257/Z557 Z Master2002-2006 944T/904T/910T2003-2004 Groundsmaster 1202003-2004 Z148/Z553/Z588E Z Master
  • Starter Replacement OE Number:6744N, KH-24-098-01,KH-25-098-11-S,AM132702,MIA11473,E7194-63010,8000335,8000869,228000-7190,6744,SDR0291
  • Package Included: 6744N NEW Starter; 0.8KW;12V; 10Tooth PinionTeeth; CW; PMDD;Starter Compatible with 2003-2006 Dingo TX-4202004-2006 Z-Force 44/48/502004-2006 5252E/5252/GT1554/GT2542/GT2550/GT2554/GT3200/GT31002004-2006 M48-KHS/M50-KHS/M54-KH/M60-KH Tank/M60-KH EFI Tank/Z-Wing 48/2004-2006 Big Country 4x2 Utility/Big Country 6x4 Fire & Rescue/Big Country 6x42004-2008 GT25542005-2006 GT2523/GT2544/LT2542/LT2042/LT10502005-2006 Z400 Z Master/Z450 Z Master/Z500 Z Master2005-2008 Volunteer 4x2 FIS Utility2006-2007 Z560 Z Master2007-2009 Z510A2008-2009 Z550 Z Master2008-2012 Volunteer 4x42009-2015 Volunteer 4x4 EFI2010-2014 Volunteer 4x22011-2012 25G/25GT2012-2015 Volunteer 4x4 EFI
  • Perfect Fit:Precision-engineered with 100% new, OEM-grade materials to ensure exact dimensional accuracy and perfect fitment for a direct, no-modification installation
  • Engineered for Reliable Starts: Built with wear-resistant components and validated through rigorous testing, this starter is designed to deliver consistent cranking power and withstand the demands of daily operation, ensuring a prolonged lifespan

Compatible Vehicles

Check if this fits your vehicle

Compatible vehicle data is being verified for this product.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Tom_Handy_603

12/06/2025

Very fast delivery and the part was exactly what I needed. It fit my Deines mower perfectly without any modifications. Super easy DIY fix.

RickFixIt_487

01/14/2026

This starter solved all my cranking issues on the tractor. It feels much more powerful than the worn-out unit I replaced. It's nice to have a reliable start every time.

FAQS

Please refer to the picture. Generally,a starter does not include bolts or other accessories. It is recommended to make full use of the existing bolts, screws and other accessories, which can be perfectly matched with the original accessories.

Check the part number, mounting points, and electrical connections. Confirm any differences before installation.

Not necessarily. Keep your existing battery if it tests good and holds a charge.