2003 Dodge Neon 2.0L | 1.2KW 9-Tooth Starter | 17849N - PHILTOP

2003 Dodge Neon 2.0L | 1.2KW 9-Tooth Starter | 17849N - PHILTOP

Power: 1.2 kW

Pinion Teeth: 9

Quick Starting Response

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4034STM148TUS

Specifications

Brand
PHILTOP
Power
1.2 kW
Pinion Teeth
9
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 17849N 1x Manual
Warranty Period
2-Year
Part Number
17849N

Highlights

  • Starter Compatible with:2003-2009 PT Cruiser 2.4L, 2003 Neon 2.0L, 2010 PT Cruiser
  • Starter Replacement OE Number:17849N,5033067AB, 05033067AB, 17849, 17849N, M0T84882, 91273354, RX033067AB, 178498, 88861890, MPA17849, RX034555AA
  • Package Included: 17849N NEW Starter; 1.2KW;12V; 9Tooth PinionTeeth; CW; PMGR
  • Perfect Fit:Precision-engineered with 100% new, OEM-grade materials to ensure exact dimensional accuracy and perfect fitment for a direct, no-modification installation
  • Engineered for Reliable Starts: Built with wear-resistant components and validated through rigorous testing, this starter is designed to deliver consistent cranking power and withstand the demands of daily operation, ensuring a prolonged lifespan

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 2009201020102008 - 20092003 - 200820062003 - 2009200320032003
MakeChryslerChryslerChryslerChryslerChryslerChryslerChryslerDodgeDodgeDodge
ModelPT CruiserPT CruiserPT CruiserPT CruiserPT CruiserPT CruiserPT CruiserNeonNeonNeon
TrimBaseClassicCouture EditionLXLimitedStreet CruiserTouringR/TSESXT
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.0L L42.0L L42.0L L4
Note----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

Reviews

5.0/5

Based on 7 reviews

5100%
40%
30%
20%
10%

brandi

09/20/2026

Verified buyer

Worked perfect so far !! Just as described!! Direct fit for 2008 pt cruiser 2.4 L

Jacob High

08/10/2026

Verified buyer

Fit perfectly. Easy to install. Seems to be made really well. Same quality as a premium part for a lot less cost. Would recommend the purchase

FAQS

Yes, easy to install. To ensure safety and correct installation, which varies by vehicle, professional tools are required. Consult our included manual and video guide.

Yes. Follow your vehicle’s instructions; on most conventional vehicles, disconnect the negative terminal first.

Yes, if they are undamaged and connect securely. Replace badly corroded, frayed, or melted cables.