2013-2016 Dodge Dart 1.4L L4 | 1.2KW 12-Tooth Starter | OE#10874 - PHILTOP

2013-2016 Dodge Dart 1.4L L4 | 1.2KW 12-Tooth Starter | OE#10874 - PHILTOP

Power: 1.2 kW

Pinion Teeth: 12

Quick Starting Response

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6599STM183PUS

Specifications

Brand
PHILTOP
Power
1.2 kW
Pinion Teeth
12
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 10874N 1x Manual
Warranty Period
2-Year
OE Number
10874,56029698AA,M000T33872,M0T33872,M0T33872ZC

Highlights

  • Fitment: Starter Compatible with Fiat 2014-2019 500 1.4L, Dodge 2013-2016 Dart 1.4L, (Mitsubishi Permanent Magnet Gear Reduction, 12-Tooth).(Please MATCH your vehicle on the left top before purchasing)
  • Specifications: ①Power: 1.2Kw, ②Voltage:12, ③Rotation Direction: CW, ④Specs for: Mitsubishi PMGR, ⑤Tooth Pinion: 12.[Reference Number]:10874, M000T33872, M0T33872, M0T33872ZC, 56029698AA
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H corrosion resistance test, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance
  • Easy Installation: Our replacement alternators for cars are designed for plug-and-play installation, requiring no modifications or drilling, making the installation quick and easy. Note: 1.Please double check the part number of your item, matching information is for reference only.2.Product functions are fully compatible with the original equipment. Minor cosmetic differences may occur across production batches; please refer to the actual product for details

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 2016201320132013201620192014 - 20192014 - 201920162014 - 20192014 - 20192014 - 20162014 - 201620162014 - 20192014 - 2019
MakeDodgeDodgeDodgeDodgeDodgeFiatFiatFiatFiatFiatFiatFiatFiatFiatFiatFiat
ModelDartDartDartDartDart500500500500500500500500500500500
TrimAeroLimitedRallyeSXTSXT Sport1957 Retro EditionAbarthAbarth CabrioEasyLoungePopSportTurboc Easyc Loungec Pop
Engine1.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L4
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

RickFixIt_317

11/22/2025

No more clicking sounds when I try to start my car. This motor is quiet and powerful, and it definitely feels like a step up from the factory unit.

Kelly_SUV_Life_809

04/16/2026

Very fast shipping and the part was well-packaged. Putting it in my Dodge was easy enough for a DIY job and it has been working perfectly since day one.

FAQS

Please refer to the picture. Generally,a starter does not include bolts or other accessories. It is recommended to make full use of the existing bolts, screws and other accessories, which can be perfectly matched with the original accessories.

Slow cranking can also result from low battery charge, poor ground connections, damaged cables, unsuitable engine oil viscosity, or mechanical resistance in the engine. Check these conditions before assuming the replacement starter is faulty.

Check the battery and cable connections first. Low battery power or loose wiring can cause similar starting problems.