2005-2010 Chrysler 300 2.7L/3.5L | 1.2KW 10-Tooth Starter | 19025N - PHILTOP

2005-2010 Chrysler 300 2.7L/3.5L | 1.2KW 10-Tooth Starter | 19025N - PHILTOP

Power: 1.2 kW

Pinion Teeth: 10

Quick Starting Response

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3173STM044XUS

Specifications

Brand
PHILTOP
Power
1.2 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 19025N 1x Manual
Warranty Period
2-Year
Part Number
19025N

Highlights

  • Starter Compatible with:2005-2010 300 3.5L, 2006-2010 Charger 3.5L, 2005-2010 300 2.7L, 2006-2010 Charger 2.7L, 2005-2008 Magnum 3.5L, 2009-2010 Challenger 3.5L, 2005-2008 Magnum 2.7L
  • Starter Replacement OE Number:19025N,4608800A, 4608800AC, M000T21171, 19025N, 04608800AC, RL801651AA
  • Package Included: 19025N NEW Starter; 1.2KW;12V; 10Tooth PinionTeeth; CW; PMGR
  • Perfect Fit:Precision-engineered with 100% new, OEM-grade materials to ensure exact dimensional accuracy and perfect fitment for a direct, no-modification installation
  • Engineered for Reliable Starts: Built with wear-resistant components and validated through rigorous testing, this starter is designed to deliver consistent cranking power and withstand the demands of daily operation, ensuring a prolonged lifespan

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20072008 - 20092005 - 20102010200920102005 - 20102009 - 20102006 - 20072006 - 20072006 - 20102007 - 20102006 - 20102006 - 20102005 - 20082007 - 20082005 - 20082005
MakeChryslerChryslerChryslerChryslerChryslerChryslerChryslerDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
Model300300300300300300300ChallengerChargerChargerChargerChargerChargerChargerMagnumMagnumMagnumMagnum
TrimBaseLXLimitedSSignature SeriesTouringTouringSEBaseBasePursuitSESESXTSESESXTSXT Special Edition
Engine2.7L V62.7L V63.5L V63.5L V63.5L V62.7L V63.5L V63.5L V62.7L V63.5L V63.5L V62.7L V63.5L V63.5L V62.7L V63.5L V63.5L V63.5L V6
Note------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

Rob_HomeGarage_509

03/17/2026

You cannot beat the price for a starter of this quality. It looks and performs just like the more expensive brands you find at the local auto shops.

Mike from Texas_768

12/10/2025

The package arrived a day early which was a nice surprise. Putting it in was very straightforward and it fit my Chrysler 300 like a glove.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.