1970-1980 MG MGB 1.8L L4 | 1.1KW 10-Tooth Starter | 16164N - PHILTOP

1970-1980 MG MGB 1.8L L4 | 1.1KW 10-Tooth Starter | 16164N - PHILTOP

Power: 1.1 kW

Pinion Teeth: 10

Quick Starting Response

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4912STM1916US

Specifications

Brand
PHILTOP
Power
1.1 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 16164N 1x Manual
Warranty Period
2-Year
Part Number
16164N

Highlights

  • Starter Compatible with:for MG ,1970-1980 MGB 1.8L
  • Starter Replacement OE Number:16164N,25654, 25660, 16164N, 25616, 25654AH
  • Package Included: 16164N New Starter; 1.1KW;12V; 10Tooth PinionTeeth; CW; DD
  • Perfect Fit:Precision-engineered with 100% new, OEM-grade materials to ensure exact dimensional accuracy and perfect fitment for a direct, no-modification installation
  • Engineered for Reliable Starts: Built with wear-resistant components and validated through rigorous testing, this starter is designed to deliver consistent cranking power and withstand the demands of daily operation, ensuring a prolonged lifespan

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1970 - 19741970 - 19741975 - 1980
MakeMGMGMG
ModelMGBMGBMGB
TrimBaseGTMK IV
Engine1.8L L41.8L L41.8L L4
Note---

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

AK-Johnny

08/02/2026

Verified buyer

I need to replace the starter on my 73 MGB, and the ones from Moss are quite pricey.I took a chance with this one and it has worked out great.It's smaller and lighter than the stock Lucas starter, so it was easy to install. It seems top spin well and the car starts right up.If you're interested in a concours car, stick with the Lucas. If you want a nice driver, with a modern starter, this one has been great so far.

Mindy m.

05/23/2026

Verified buyer

I recently installed the PHILTOP 16164N starter in my 1972 MGB, and I’ve been really pleased with its performance. The fit was perfect and it started my car without any issues right off the bat. I appreciate how it feels like it was really designed for my model, which gives me peace of mind.After a few weeks of driving, I can confidently say that it has held up well under various conditions. The motor runs smoothly and quietly, which is a nice change from the old starter that had been struggling. Overall, I would definitely recommend this starter if you're looking to replace an old or faulty one. It's a solid choice for any MGB owner.

FAQS

PHILTOP Starter are specifically designed for [specific vehicle models]. Rigorously tested to OE standards. You can check the vehicle compatibility and product images to ensure a perfect match.

Avoid prolonged or repeated cranking. Follow your vehicle’s recommended starting intervals to prevent overheating.

Slow cranking can also result from low battery charge, poor ground connections, damaged cables, unsuitable engine oil viscosity, or mechanical resistance in the engine. Check these conditions before assuming the replacement starter is faulty.