2002 Jeep Liberty 3.7L V6 | 1.4KW 10-Tooth Starter | 17877N - PHILTOP

2002 Jeep Liberty 3.7L V6 | 1.4KW 10-Tooth Starter | 17877N - PHILTOP

Power: 1.4 kW

Pinion Teeth: 10

Quick Starting Response

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1676STM0276US

Specifications

Brand
PHILTOP
Power
1.4 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 17877N 1x Manual
Warranty Period
2-Year
Part Number
17877N

Highlights

  • Fitment: Starter Compatible with Jeep 2002 Liberty 3.7L.(Please MATCH your vehicle on the left top before purchasing)
  • Specifications: ①Power: 1.4Kw, ②Voltage:12, ③Rotation Direction: CW, ④Specs for: Mitsubishi PMGR, ⑤Tooth Pinion: 10.[Reference Number]:56041641AC, M1T86883, 17877, 17877N
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H corrosion resistance test, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance
  • Easy Installation: Our replacement alternators for cars are designed for plug-and-play installation, requiring no modifications or drilling, making the installation quick and easy. Note: 1.Please double check the part number of your item, matching information is for reference only.2.Product functions are fully compatible with the original equipment. Minor cosmetic differences may occur across production batches; please refer to the actual product for details

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200220022002
MakeJeepJeepJeep
ModelLibertyLibertyLiberty
TrimLimitedRenegadeSport
Engine3.7L V63.7L V63.7L V6
Note---

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Customer

04/01/2026

Verified buyer

Blah to install on the 2013 accent but works good so far

Jason_Trucks_758

03/19/2026

Lightning fast shipping and the swap was very easy. I am really happy with how smoothly the whole process went from ordering to installing.

FAQS

Consider replacement if you notice: slow cranking, loud grinding/clicking noises, or the engine not turning over. Please confirm the specific parameters of the product before purchasing.

Not necessarily. Keep your existing battery if it tests good and holds a charge.

The engine should crank smoothly without grinding. If the starter keeps running after the engine starts, switch off immediately.