2002-2007 Nissan Altima 2.5L L4 | 1.4KW 13-Tooth Starter | 17835N - PHILTOP

2002-2007 Nissan Altima 2.5L L4 | 1.4KW 13-Tooth Starter | 17835N - PHILTOP

Power: 1.4 kW

Pinion Teeth: 13

Quick Starting Response

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8010STM123KUS

Specifications

Brand
PHILTOP
Power
1.4 kW
Pinion Teeth
13
Voltage
12 V
Rotation Direction
CCW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 17835N 1x Manual
Warranty Period
2-Year
Part Number
17835N

Highlights

  • Starter Compatible with:2002-2007 Altima 2.5L, 2002-2006 Sentra 2.5L
  • Starter Replacement OE Number:17835N,233008J000, M0T60781, 233008J001, 17835, 17835N, 233008J001R, M1T68781, 91273329, 19135616, MPA17835
  • Package Included: 17835N NEW Starter; 1.4KW;12V; 13Tooth PinionTeeth; CW; PMGR
  • Perfect Fit:Precision-engineered with 100% new, OEM-grade materials to ensure exact dimensional accuracy and perfect fitment for a direct, no-modification installation
  • Engineered for Reliable Starts: Built with wear-resistant components and validated through rigorous testing, this starter is designed to deliver consistent cranking power and withstand the demands of daily operation, ensuring a prolonged lifespan

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20042006 - 200720072002 - 20072002 - 2006200320042002 - 2006
MakeNissanNissanNissanNissanNissanNissanNissanNissan
ModelAltimaAltimaAltimaAltimaAltimaSentraSentraSentra
TrimBaseBaseHybridSSLLimited EditionSSE-R
Engine2.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L4
Note
To 10/2006
To 10/2006
To 10/2006
To 10/2006
To 10/2006
---

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

Reviews

4.7/5

Based on 6 reviews

583%
40%
317%
20%
10%

Tom_Handy_726

03/14/2026

My old starter was on its last legs, and this one has much more kick. It is a night and day difference when I turn the key.

Rob_HomeGarage_494

10/13/2025

It arrived way sooner than I expected. Bolted right up to my 2.5L engine with no issues at all.

FAQS

Yes, easy to install. To ensure safety and correct installation, which varies by vehicle, professional tools are required. Consult our included manual and video guide.

Not necessarily. Keep your existing battery if it tests good and holds a charge.

The engine should crank smoothly without grinding. If the starter keeps running after the engine starts, switch off immediately.