2007-2010 Ford Edge 3.5L V6 | Power Steering Pump w/Pulley | 201401 - PHILTOP

2007-2010 Ford Edge 3.5L V6 | Power Steering Pump w/Pulley | 201401 - PHILTOP

Complete Parts Range

Leak-Tested

Durable

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5883PSP2405US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Reservoir Included
No
Pulley Attachment Type
Press-on
Outlet Connection Type
Threaded
Outlet Thread Size
14x1.5 in
Inlet Connection Type
Hose Barb
Drive Type
Engine
Material
Aluminium/Iron
Items Included
1x Power Steering Pump - 201401, 1x Manual
Warranty Period
2-Year
Part Number
201401

Highlights

  • (Fitment)2007-2010 Edge,2007 2008 2009 2010 2011 2012 MKZ 3.5L,2007-2010 MKX,2010-2012 Fusion 3.5L
  • (OE Replacement)20-1401、7H6Z3A696A、9T4Z3A696A、8T433A696AA、7T4Z3A696A、9T433A696AA、AH6Z3A696A、AH6C3D639AB、AH6Z3A393A, Condition: Brand New (Not Remanufactured); Pulley Included: Yes, Reservoir Included: No, Inlet Attachement Type:Hose Barb, Outlet Attachment Type: Threaded, Pulley attachment types: Press-on, Outlet inner diameter size: 14x1.5
  • (Reliable and Durable)Power steering pump mkz mkx built with premium quality Reliable and Durable and multiple tests has been taken to ensure quality and durability with beautiful finish. Automotive steering system replacement parts maintain a good strength to give the parts long time performance.
  • (Easy Installation)Before installing the edge power steering pump 2007 2008 2009 2010, it is highly recommended that the system be flushed. If there is noise after installing the steering pump, make sure that the air is expelled, the oil feed line is locked, the oil filter is not blocked, and the oil is clean and low viscosity.
  • (FUNCTION)Automotive steering system replacement parts assist you in solving the problems of leakage from old 2010 2011 2012 fusion sport power steering pump, difficult to turn or unresponsive steering wheel, groaning and squealing noises of the pump, when the vehicle starts.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20102007 - 20102007 - 201020072009 - 20102010 - 20122007 - 20102007 - 2012
MakeFordFordFordFordFordFordLincolnLincoln
ModelEdgeEdgeEdgeEdgeEdgeFusionMKXMKZ
TrimLimitedSESELSEL PlusSportSportBaseBase
Engine3.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V6
Note
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0550-Power steering pressure sensor circuit — inspect the sensor connector and wiring.
  • P0551–P0553-Pressure sensor circuit range/performance or low/high input — check pressure, sensor signals, and wiring.
  • P0620-Generator control circuit — check the charging system and related wiring.
  • P0562-Low system voltage — check the battery, charging output, and power connections.

Codes alone do not confirm power steering pump failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Confirm fitment: Compare mounting points, pulley specifications, fluid ports, and any sensor connectors.
  • Inspect the system: Check fluid condition, hoses, seals, and the drive belt for leaks or damage.
  • Check the new pump: Inspect for shipping damage and confirm smooth pulley rotation where applicable.

Installation Steps

  • STEP 1 — Let the engine cool, disconnect the negative battery cable, and drain the power steering fluid.
  • STEP 2 — Photograph the belt routing and hose connections. Release belt tension and remove the belt from the pump.
  • STEP 3 — Disconnect hoses and any wiring. Cap open lines to keep out dirt, then remove the old pump.
  • STEP 4 — Clean or flush contaminated lines. Install the new pump with new specified seals and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses and wiring. Reinstall the belt with correct alignment and tension.
  • STEP 6 — Fill with the specified fluid and bleed the system using the vehicle-specific procedure. Never run the pump dry or hold the steering at full lock.

After Installation

  • Verify correct belt seating and secure hose connections.
  • With the engine idling, check for smooth steering assist without unusual noise or vibration.
  • Inspect the pump and lines for leaks.
  • Switch off the engine, allow the fluid to settle, and recheck the level.

Product Video

Product Description

11

Reviews

4.7/5

Based on 6 reviews

583%
40%
317%
20%
10%

Kj

11/16/2025

Verified buyer

It works very well, the power pump looks high quality, runs smoothly, and I would recommend it.

Z Zeug

08/21/2024

Verified buyer

Perfect replacement, fits my Ford Fusion 2010 exactly

FAQS

Please take the time to carefully verify if your vehicle is compatible with our offering.Please under the guidance of professionals, ensure a smooth and expert installation process. (Instructions not included)

Mismatched high-pressure interface size, aging of sealing ring or gasket. The low-pressure pipe is damaged or loosened: Check whether the oil pipe is loose after tightening the bolts, and whether the gasket or seal is deformed.

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.