2010-2012 Mercedes-Benz GLK350 3.5L V6 | Power Steering Pump | 21542 - PHILTOP

2010-2012 Mercedes-Benz GLK350 3.5L V6 | Power Steering Pump | 21542 - PHILTOP

Complete Parts Range

Leak-Tested

Durable

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4040PSP647BUS

Specifications

Brand
PHILTOP
Pulley Included
Yes
Reservoir Included
No
Pulley Attachment Type
Press-on
Outlet Connection Type
Bolt-on
Inlet Connection Type
Quick Connect
Drive Type
Engine
Material
Aluminium/Iron
Items Included
1x Power Steering Pump - 21542, 1x Manual
Warranty Period
2-Year
Part Number
21542

Highlights

  • #1,201,256 in Automotive (See Top 100 in Automotive)
  • #1,980 in Automotive Replacement Power Steering Pumps
  • [Vehicle Fitment]PHILTOP power steering pump compatible with 2010-2012 GLK350
  • [Replacement Number & Specifications]6.46623010064662E+22.Please use Suncentauto's vehicle fitment tool to confirm if the part is suitable for your vehicle application.Outlet ID Size: -; Inlet Attachement Type: Quick Connect; Outlet Attachment Type: Bolt-on; Pulley Attachement Type: Press-on
  • [Excellent Quality]The power steering pump is mainly made of high-strength aluminum alloy or iron and other high-quality metal materials, with excellent corrosion resistance and service life; the internal key components are made of high-quality engineering plastics, and undergo strict material selection and processing technology to ensure a higher reliability
  • [Reliable and Durable]The power assist pump adopts advanced CNC machining technology, with strict tolerance control of each component and high assembly accuracy. It also adopts high-quality seals and lubrication system design to effectively prevent oil leakage and wear. Product performance indicators meet or exceed industry standards
  • [Warm Tips]If you experience steering fluid leakage, sharp noises when steering, heavy and jerky steering, metal shavings in the steering fluid, and the power steering symbol on the dashboard, you may need to replace the old power steering pump. This power steering pump can perfectly solve these problems, making the wheels turn smoothly and eliminating steering squeaking and sharp noises. If you have any questions, please feel free to contact us and we will provide you with a satisfactory solution.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122010 - 2012
MakeMercedes-BenzMercedes-Benz
ModelGLK350GLK350
Trim4MaticBase
Engine3.5L V63.5L V6
Note
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included;with Original Equipment (OE) # 006 466 23 01
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included;with Original Equipment (OE) # 006 466 23 01

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0550-Power steering pressure sensor circuit — inspect the sensor connector and wiring.
  • P0551–P0553-Pressure sensor circuit range/performance or low/high input — check pressure, sensor signals, and wiring.
  • P0620-Generator control circuit — check the charging system and related wiring.
  • P0562-Low system voltage — check the battery, charging output, and power connections.

Codes alone do not confirm power steering pump failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Confirm fitment: Compare mounting points, pulley specifications, fluid ports, and any sensor connectors.
  • Inspect the system: Check fluid condition, hoses, seals, and the drive belt for leaks or damage.
  • Check the new pump: Inspect for shipping damage and confirm smooth pulley rotation where applicable.

Installation Steps

  • STEP 1 — Let the engine cool, disconnect the negative battery cable, and drain the power steering fluid.
  • STEP 2 — Photograph the belt routing and hose connections. Release belt tension and remove the belt from the pump.
  • STEP 3 — Disconnect hoses and any wiring. Cap open lines to keep out dirt, then remove the old pump.
  • STEP 4 — Clean or flush contaminated lines. Install the new pump with new specified seals and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses and wiring. Reinstall the belt with correct alignment and tension.
  • STEP 6 — Fill with the specified fluid and bleed the system using the vehicle-specific procedure. Never run the pump dry or hold the steering at full lock.

After Installation

  • Verify correct belt seating and secure hose connections.
  • With the engine idling, check for smooth steering assist without unusual noise or vibration.
  • Inspect the pump and lines for leaks.
  • Switch off the engine, allow the fluid to settle, and recheck the level.

Product Video

Product Description

Power Steering PumpSteering Pump

Reviews

4.9/5

Based on 7 reviews

586%
414%
30%
20%
10%

Lisa_CivicDriver_362

10/02/2025

The workmanship on this pump is excellent, feels really solid. For the price, it's an amazing deal. My GLK350 steers like a dream now.

Chris_GearHead_514

03/08/2026

Got here in just a couple days, super impressed with the shipping speed. Installation was a breeze, and it fit perfectly. Couldn't ask for better!

FAQS

1.Power steering fluid low: Check oil tank level. 2. Air in the boost system: Check the oil for air bubbles. 3. Aging pipes and clip: Check the aging of low pressure pipe. 4. Rotational system issues: Check associated axle clearance except crankshaft

Please take the time to carefully verify if your vehicle is compatible with our offering.Please under the guidance of professionals, ensure a smooth and expert installation process. (Instructions not included)

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.