2008-2012 Ford Escape 3.0L | Aluminum 1" Radiator | OE#8L8Z8005BCP/CU13041 - PHILTOP

2008-2012 Ford Escape 3.0L | Aluminum 1" Radiator | OE#8L8Z8005BCP/CU13041 - PHILTOP

Leak-Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3207RAD0061US

Specifications

Brand
PHILTOP
Transmission Oil Cooler Included
No
Engine Oil Cooler Included
No
Core Thickness
1 in
Core Width
18-1/16 in
Core Height
27-9/16 in
Radiator Cap Included
No
Inlet Diameter
1-1/4 in
Outlet Diameter
1-1/2 in
Items Included
1x Radiator - CU13041, 1x Instruction Manual
Mounting Type
Top / Bottom Post
Core Material
Aluminium
Radiator Flow Type
Cross Flow
Warranty Period
2-Year
OE Number
8L8Z8005BCP,8L8Z8005B,ZZC515200A,8L8Z8005C,ZZC515200,H2MZ8005R
Part Number
CU13041,2219040,13041C,4113041,4113052,13041,FO3010278,MA3010224,8012,KLI13041,SBR13041,PR13041A,8013,438134,1981200638,B13041,BES13041,CUC13041,0R013041A2CM,AM13041,NR13041B,CR13041,CR13052,56539,REA4113041A

Highlights

  • Compatible with: 2008-2012 Escape 3.0L(From 06/23/2008), 2009-2011 Mariner 3.0L, 2008-2011 Tribute 3.0L
  • OEM Replacement:CU13041, 4113041, 2213516, 2219040, 13041C, ZZC515200, H2MZ8005R, 8L8Z8005C, 8L8Z8005BCP, 8L8Z8005B, ZZC515200A, RA13041C, 735332, 438134, 8012
  • IATF16949 Certification: Designed with outstanding durability, in compliance with the original specifications, and suitable for direct replacement.
  • High-Efficiency Cooling: Engineered with a high-density aluminum core and multi-layer cooling fins, ensuring optimal heat dissipation and maintaining the engine's ideal operating temperature.
  • Easy and Quick to Install - Direct bolt-on OE fitment or replacement for factory unit, fast and easy installation without any drilling or modification.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20082009 - 201220082009 - 20122008 - 20112009 - 20112009 - 2011
MakeFordFordFordFordMazdaMercuryMercury
ModelEscapeEscapeEscapeEscapeTributeMarinerMariner
TrimLimitedLimitedXLTXLTSBasePremier
Engine3.0L V63.0L V63.0L V63.0L V63.0L V63.0L V63.0L V6
Note
From Jun/23/2008
-
From Jun/23/2008
----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm fitment: Compare mounting points, hose connections, and oil cooler ports with the original radiator.
  • Inspect components: Check the radiator, hoses, clamps, and seals for damage or leaks.
  • Check coolant: Inspect the coolant level and condition. Flush contaminated coolant before installing the new radiator.

Installation Steps

  • STEP 1 — Let the engine cool completely, then disconnect the negative battery cable. Never open the pressure cap while hot.
  • STEP 2 — Drain the coolant into a suitable container and flush the system as required.
  • STEP 3 — Disconnect hoses, applicable oil cooler lines, and fan wiring. Remove the fan assembly and radiator as required by the vehicle’s service procedure.
  • STEP 4 — Transfer required brackets and accessories. Install the new radiator and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses, cooler lines, and electrical connectors. Refill with the specified coolant, bleed trapped air, and fit the correct pressure cap.

After Installation

  • Check hose connections, cooler lines, and the cooling system for leaks.
  • Confirm normal engine temperature and proper cooling fan operation.
  • After the engine cools completely, recheck the coolant level and top up as needed.
  • Recheck for leaks after a short test drive.

Product Video

Product Description

radiatorradiator

Reviews

4.7/5

Based on 13 reviews

577%
415%
38%
20%
10%

Orelbe Guevara

08/02/2026

Verified buyer

Tiene la calidad requerida Se ajusta a la necesidad

frank

05/03/2026

Verified buyer

Good job

FAQS

Overheating may also involve low coolant, trapped air, a thermostat, water pump, cooling fan, cap, hose, sensor, or engine condition.

Minor fin movement can occur during handling and may not affect normal operation. Do not install the radiator if the tubes, tanks, or mounting points are damaged.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.