2004-2005 Toyota Avalon 3.5L | Rear Strut Assembly w/Spring | 172455 - PHILTOP

2004-2005 Toyota Avalon 3.5L | Rear Strut Assembly w/Spring | 172455 - PHILTOP

Rear

Complete Strut & Coil Spring Assembly

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3350SAA03YNUS

Specifications

Brand
PHILTOP
Items Included
1x Rear Right Complete Strut Assembly - 172456 1x Rear Left Complete Strut Assembly - 172455
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
172455,172456

Highlights

  • COMPATIBILITY:for 2004-2005 Toyota Avalon
  • OE Numbers:172455/ 172456
  • GET THE RIGHT PART: Before purchasing, please check the “Suncentauto Confirmed Fit” bar to ensure this part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase
  • Package Includes:1x Rear Right Complete Strut Assembly-172456,1x Rear Left Complete Strut Assembly-172455
  • Stringent Quality Control: Each shock absorber undergoes thorough factory testing, pre-assembled and ready for installation without any modifications. Mount interfaces adhere to OE original design, ensuring effortless and precise installation.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200520052004200520042005
MakeToyotaToyotaToyotaToyotaToyotaToyota
ModelAvalonAvalonAvalonAvalonAvalonAvalon
TrimLimitedTouringXLXLXLSXLS
Engine3.5L V63.5L V63.0L V63.5L V63.0L V63.5L V6
Note
To 01/2005
To 01/2005
To 01/2005
To 01/2005
To 01/2005
To 01/2005

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

总成无适配12

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

Dom DiMascio

10/14/2026

Verified buyer

Struts fit perfectly! Looked practically identical to OEM struts. Make sure you check part number, year, and front or rear before ordering.

Bran1505

12/29/2024

Verified buyer

Excellent improvement to ride comfort after doing the rear shocks last week the addition of these rear shocks make the vehicle ride like new again. Great quality product perfect fit come fully complete and ready to go in Read more

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.