2004-2007 Ford Freestar 3.9L V6 | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 18B4909 - PHILTOP

2004-2007 Ford Freestar 3.9L V6 | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 18B4909 - PHILTOP

Hanger Included

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3250DBC2774US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
0.39
Bleeder Port Thread Size
M10x1.0
Mounting Hardware Included
No
Quantity
2
Position
Rear
Items Included
1x Rear Right Caliper - 18B4908 1x Rear Left Caliper - 18B4909
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.79 In in
Warranty Period
2-Year
Part Number
18B4909,18B4908

Highlights

  • [Vehicle Compatibility] The Rear brake caliper fit for 2004-2007 Freestar, 2004-2007 Monterey
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 18-B4908, 18-B4909, 18B4908, 18B4909, 184908, 184909, 6F2Z2553A, 3F2Z2553AB, 3F2Z2B511BA, 3F2Z2200AA, 5F2Z2200AA
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Quality Pass] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20072004 - 20072004 - 20052004 - 200720072004 - 20072004 - 2005200420052005 - 20072004 - 2005
MakeFordFordFordFordFordFordFordMercuryMercuryMercuryMercury
ModelFreestarFreestarFreestarFreestarFreestarFreestarFreestarMontereyMontereyMontereyMonterey
TrimBaseLimitedSSESESELSESBaseConvenienceLuxuryPremier
Engine3.9L V64.2L V63.9L V63.9L V64.2L V64.2L V63.9L V64.2L V64.2L V64.2L V64.2L V6
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Ashley_RoadTrip_363

04/30/2026

Fixed the squealing noise and inconsistent braking I was having. The car stops much more smoothly now. Worth every penny.

CarGuy_John_610

11/05/2025

The build quality is excellent, feels very durable. Honestly, I was expecting less for the price, but this is a great component. Highly recommend.

FAQS

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Brake calipers are commonly position-specific. Confirm the axle and side shown in the product specifications before installation.

A single caliper may be replaced when only one side has failed, but the opposite caliper, pads, rotors, hoses, and slide components should also be inspected for uneven operation or wear.

2004-2007 Ford Freestar Brake Caliper 2 PC Rear w/Bracket w/Hanger | 18B4909 | PHILTOP