2007-2010 Ford Edge 3.5L | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 18B5043 - PHILTOP

2007-2010 Ford Edge 3.5L | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 18B5043 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7208DBC527PUS

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
2
Position
Rear
Color
Silver
Items Included
1x Rear Right Caliper - 18B5042 1x Rear Left Caliper - 18B5043
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.69 in
Warranty Period
2-Year
Part Number
18B5043,18B5042

Highlights

  • [Vehicle Compatibility] The Rear brake caliper fit for 2007-2010 Edge, 2007-2012 CX-7, 2007-2010 MKX
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 18-B5042, 18-B5043, 18B5042, 18B5043, 185042, 185043, L20626980D, L2Z62698ZA
  • [Ductile Iron] PHILTOP brake calipers kit are made of the same ductile iron as the original. Cast iron has strong heat resistance, which effectively reduces the risk of deformation or breakage during sudden braking
  • [Quality Pass] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts a refined galvanizing process, which has excellent rust prevention and environmental protection performance. 193 hours of salt spray test without rust, ensuring that the brake caliper can remain clean and durable even in harsh environments

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20102007 - 20102007 - 201020072009 - 20102007 - 20102007 - 20122010 - 20122007 - 20092010 - 20122007 - 20122011 - 2012
MakeFordFordFordFordFordLincolnMazdaMazdaMazdaMazdaMazdaMazda
ModelEdgeEdgeEdgeEdgeEdgeMKXCX-7CX-7CX-7CX-7CX-7CX-7
TrimLimitedSESELSEL PlusSportBaseGrand TouringSVSportSportTouringTouring
Engine3.5L V63.5L V63.5L V63.5L V63.5L V63.5L V62.3L L42.5L L42.3L L42.5L L42.3L L42.5L L4
Note------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

SarahDrives_329

12/28/2025

This rear caliper is well-made, you can tell by the weight and finish. It's a great deal considering how much they charge at the auto parts store. Highly recommend for the quality and price.

Kelly_SUV_Life_498

03/23/2026

Got this for my CX-7 and it fit like a glove. Installation was super easy, and the shipping was lightning fast. I had it in my hands the very next day.

FAQS

Always use new sealing washers on the banjo bolt; never reuse the old ones.The hose may be reusable if it is the correct type and shows no cracks, swelling, leakage, damaged fittings, or internal restriction. Replace it if its condition is uncertain.

Opening a hydraulic brake line normally introduces air, so the system should be bled according to the vehicle service procedure. Some vehicles may require a scan tool for part of the process.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.