2005-2009 Subaru Outback 2.5L/3.0L | Rear Strut & Coil Spring Shock Assemblies 2-Pack | 815811 - PHILTOP

2005-2009 Subaru Outback 2.5L/3.0L | Rear Strut & Coil Spring Shock Assemblies 2-Pack | 815811 - PHILTOP

Rear

Complete Strut & Coil Spring Assembly

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1716SAA844JUS

Specifications

Brand
PHILTOP
Items Included
2x Rear Strut & Coil Spring Shock Assemblies - 272567
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
815811

Highlights

  • Shocks and Struts OE Number: 811962,33SB1103,20310AG04A,20310AG05A,20365AG14A,20365AG03A,1345402,272567.
  • Vehicle compatibility: The PHILTOP Rear Strut Shocks Assembly is compatible withSubaru 2005-2007 Outback,.
  • High-Grade Material Construction: The strut assembly is manufactured using advanced alloy steel with an electrophoretic surface treatment. This design enhances corrosion resistance and wear resistance, ensuring extended service reliability and maintaining superior suspension performance for vehicles in extreme environments.
  • FUNCTION: PHILTOP struts deliver superior damping performance, efficiently absorbing energy from uneven road surfaces to ensure a smooth, stable ride. They maintain consistent tire-road contact, enhancing driving safety and reducing driver fatigue. Engineered for durability and precision, these premium shock absorbers provide a comfortable yet responsive driving experience.
  • Kits includes:2x Rear Strut & Coil Spring Shock Assemblies - 272567.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006 - 2009200720082006 - 2009200820092009200820052005 - 20062005 - 2008200620052005 - 20062005 - 20092005
MakeSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaru
ModelOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutback
Trim2.5i2.5i Basic2.5i L.L. Bean Edition2.5i Limited2.5i Limited L.L. Bean Edition2.5i Special Edition3.0 R LimitedBaseLimitedRR L.L. Bean EditionR VDC LimitedVDC LimitedXTXT Limitedi
Engine2.5L H42.5L H42.5L H42.5L H42.5L H42.5L H43.0L H62.5L H42.5L H43.0L H63.0L H63.0L H63.0L H62.5L H42.5L H42.5L H4
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

11

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

Nancy_FirstCar_10

04/08/2026

These Outback struts are built solid, you can tell right away. Feel like they'll last a long time. And the price is honestly unbelievable for the quality.

Nancy_FirstCar_7

01/27/2026

Got these on my Subaru and the installation was a breeze. They arrived very fast too. Super happy with the whole experience.

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.