2020-2021 Polaris Ranger 1000 EPS | Rear Driver Side & Passenger Side ATV/UTV Compatible CV Axle 27.26in | POL7095 - PHILTOP

2020-2021 Polaris Ranger 1000 EPS | Rear Driver Side & Passenger Side ATV/UTV Compatible CV Axle 27.26in | POL7095 - PHILTOP

Rear Left or Right

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8146SHA211MUS

Specifications

Brand
PHILTOP
Position
Rear Left or Right
ABS Ring Included
No
Quantity
1
Material
SAE 1055 Steel and Chloroprene Rubber
Items Included
1x Rear Left or Right Cv Axle Shaft
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
POL7095

Highlights

  • Fitment: 27.2in Rear CV Axle Assembly Fit for Polaris Ranger Crew XP 1000 Texas Edition 2020-2022, Polaris Ranger 1000 EPS 2020-2022, Polaris Ranger Crew 1000 Premium 2020-2022, Polaris Ranger XP 1000 Premium 2020-2022, Polaris Ranger 1000 Premium 2020-2022, Polaris Ranger Crew XP 1000 Premium 2020-2022, Polaris Ranger XP 1000 Texas Edition 2020-2021, Polaris Ranger XP 1000 High Lifter Edition 2020-2022, Polaris Ranger Crew 1000 2020-2022, Polaris Ranger 1000 2020-2022.
  • Drive Safely: The special structure inside the ball head of the half shaft is able to transmit power efficiently for better handling and stable steering.
  • Drive Shaft Parameters: 1x Rear Left or Right cv axle shaft, Compressed Length: 27.26 Inch.
  • Reliable Quality: Our CV shaft assemblies are manufactured to OE specifications and quality standards under the direction of a professional OEM manufacturer. All half shafts are factory tested for reliability, durability and performance.
  • Adaptation Validation: Before purchasing a half shaft, please confirm that the product is suitable for your vehicle by using the fit verification guide provided by Suncentauto.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2020 - 20212020 - 20212014 - 201520142013 - 2016201320142013 - 20172013 - 2014201520162015 - 20162015 - 20162013 - 20152015 - 201620162013201620162015 - 20162015 - 201620202020 - 2021
MakePolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolaris
ModelRanger 1000 EPSRanger 1000 PremiumRanger 900 Crew EPSRanger 900 Crew EPS LERanger 900 XPRanger 900 XP Bronze Mist LERanger 900 XP DeluxeRanger 900 XP EPSRanger 900 XP EPS Browning LERanger 900 XP EPS DeluxeRanger 900 XP EPS High Lifter EditionRanger 900 XP EPS Hunter Deluxe EditionRanger 900 XP EPS Hunter EditionRanger 900 XP EPS LERanger 900 XP EPS Northstar EditionRanger 900 XP EPS Trail EditionRanger 900 XP LERanger 900-5 CrewRanger 900-5 Crew EPSRanger 900-6 CrewRanger 900-6 Crew EPSRanger Crew 1000 EPSRanger Crew 1000 Premium
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBase
Engine-----------------------
Note
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Slick Willie

08/08/2026

Verified buyer

Works great

mike

08/02/2025

Verified buyer

Works flawlessly! Good CV AXLE

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.

2020-2021 Polaris Ranger 1000 EPS CV Axle Rear Driver Side & Passenger Side ATV/UTV Compatible 27.26in | POL7095 | PHILTOP