2006-2009 Yamaha Rhino 450 Rear Driver Side & Passenger Side ATV/UTV Compatible CV Axle 23.29in/24.86in | YAM7024 - PHILTOP

2006-2009 Yamaha Rhino 450 Rear Driver Side & Passenger Side ATV/UTV Compatible CV Axle 23.29in/24.86in | YAM7024 - PHILTOP

Rear

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4063SHA207XUS

Specifications

Brand
PHILTOP
Position
Rear
ABS Ring Included
No
Quantity
2
Input Shaft Spline Count
39
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
27
Items Included
2x Rear Cv Axle Shaft
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
YAM7023,YAM7024

Highlights

  • Fitment: PHILTOP Axle Shaft Fits YXR66F Rhino 660 2004-2007, YXR66F Rhino 660 Exploring Edition 2006-2007, YXR66F Rhino 660 Ducks Unlimited 2007, YXR66F Rhino 660 Special Edition 2006-2007, YXR45F Rhino 450 2006-2009, YXR66F Rhino 660 Sport Edition 2007, YXR45F Rhino 450 Special Edition 2007-2008.
  • Adaptation Verification: For a better experience, make sure the CV Axle Shaft is suitable for your vehicle before purchasing the Axle Shaft.
  • Function: CV axles are the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward. A good CV axle assembly makes for a smoother ride.
  • High Quality: The cv axle shafts are made of high quality materials with strong corrosion resistance, which improves the reliability and performance of the cv axle assembly.
  • Easy to install: Brand new cv axle shaft. Threads and splines are precision rolled for easy direct replacement.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006 - 20092006 - 2007
MakeYamahaYamaha
ModelYXR45F Rhino 450YXR66F Rhino 660
TrimBaseBase
Engine--
Note
Standard Duty Replacement
Standard Duty Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

5.0/5

Based on 4 reviews

5100%
40%
30%
20%
10%

Mil

09/28/2026

Verified buyer

It has great quality, the size is good, and it is easy to use and install. It can handle heavy loads without creating excessive noise. It looks great, works perfectly, and fits my car model very well. Overall, I really like it and am very satisfied with the quality.

Nancy_FirstCar_944

04/10/2026

Got this axle quickly and it fit my Rhino perfectly. Installation was straightforward, and it's been working great ever since. Couldn't be happier with the speed of delivery and the ease of installation.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.