2014 Polaris RZR S 800 EPS LE | Rear Driver Side & Passenger Side ATV/UTV Compatible CV Axle 27.19in | POL7031 - PHILTOP

2014 Polaris RZR S 800 EPS LE | Rear Driver Side & Passenger Side ATV/UTV Compatible CV Axle 27.19in | POL7031 - PHILTOP

Rear Left or Right

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2299SHA1997US

Specifications

Brand
PHILTOP
Position
Rear Left or Right
ABS Ring Included
No
Quantity
1
Input Shaft Spline Count
27
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
26
Items Included
1x Rear Left or Right Cv Axle Shaft
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
POL7031

Highlights

  • Fitment: PHILTOP Axle Shaft Fits Sportsman 400 HO 2011-2012, Sportsman Forest 800 6x6 2012, RZR S 800 2014, Sportsman Forest 800 2012, Ranger RZR 4 800 Gordon Edition 2010-2012, Sportsman 700 EFI X2 2008, Sportsman Forest 500 2011-2012, Sportsman 800 EFI 2007-2008 2011-2012, Sportsman 500 HO Touring 2010-2012, Sportsman 800 EFI X2 2008-2009, Ranger RZR 800 2009-2010, Ranger RZR 4 800 EPS Robby Gordon 2011, Ranger RZR 4 800 2012-2013, Sportsman 500 EFI X2 2007-2009.
  • Adaptation Verification: For a better experience, make sure the CV Axle Shaft is suitable for your vehicle before purchasing the Axle Shaft.
  • Function: CV axles are the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward. A good CV axle assembly makes for a smoother ride.
  • High Quality: The cv axle shafts are made of high quality materials with strong corrosion resistance, which improves the reliability and performance of the cv axle assembly.
  • Easy to install: Brand new cv axle shaft. Threads and splines are precision rolled for easy direct replacement.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2014201420142011201020122009 - 2012201220112009
MakePolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolarisPolaris
ModelRZR 4 800 EPS LERZR S 800RZR S 800 EPS LERanger RZR 4 800 EPS Robby GordonRanger RZR 4 800 Gordon EditionRanger RZR 4 800 Gordon EditionRanger RZR 800 SRanger RZR 800 S LERanger RZR 800 SW MilitaryRanger RZR S Military
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBase
Engine----------
Note
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
-
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Brad_AutoParts_833

12/07/2025

Got here super fast, just in time for my weekend ride. Installation was a breeze, fit perfectly. Couldn't be happier with the prompt shipping and easy install.

Steve_DIYer_32

02/20/2026

My Sportsman was vibrating badly, but these new rear axles completely eliminated the issue. It feels stable and smooth on the trails now. Big difference.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.