2006-2015 Honda Civic 1.8L/1.3L/2.0L/2.4L | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 19B3299 - PHILTOP

2006-2015 Honda Civic 1.8L/1.3L/2.0L/2.4L | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 19B3299 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1226DBC191KUS

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.25
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
1
Position
Rear, Left
Color
Silver
Items Included
1x Rear Left Caliper - 19B3299
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.33 in
Warranty Period
2-Year
Part Number
19B3299

Highlights

  • [Vehicle Compatibility] The Rear Left brake caliper fit for 2006-2015 Civic, 2013-2018 ILX
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 19-B3299, 19B3299, 193299, 43019SNAA10, 43019TR3A00, 43019TR3A01, 43019TR0A00, 43019TR3A02, 43022S5AJ00, 43022S6AJ00
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Quality Pass] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20152013 - 20182013 - 20142006 - 20152009 - 20152009 - 20112009 - 20112009 - 201420082006 - 20112012 - 2015
MakeAcuraAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHonda
ModelILXILXILXCivicCivicCivicCivicCivicCivicCivicCivic
TrimBaseBaseHybridEXEX-LHybridHybrid-LLXMUGEN SiSiSi
Engine2.0L L42.4L L41.5L L41.8L L41.8L L41.3L L41.3L L41.8L L42.0L L42.0L L42.4L L4
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
-
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
--
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.5/5

Based on 11 reviews

564%
427%
39%
20%
10%

Tomny Daza

04/10/2026

Verified buyer

Muy bueno

Blep

07/06/2025

Verified buyer

Direct Replacement for a rear caliper on a 2007 Honda Civic. Did brakes on vehicle and the piston was sticking. Rather than rebuild the caliper, I opted to order a replacement. This was a direct fit and I had zero issues installing it. Only thing noteworthy is the bleeder screw is a different size than OEM (I think it’s this was 11mm instead of 10mm). After bleeding the caliper I no longer had any noise from the rear of the car when driving. Good bang for your buck as opposed to buying at a local auto parts store.

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Brake calipers are commonly position-specific. Confirm the axle and side shown in the product specifications before installation.

A single caliper may be replaced when only one side has failed, but the opposite caliper, pads, rotors, hoses, and slide components should also be inspected for uneven operation or wear.