2002-2003 Lexus ES300 3.0L V6 | Rear Strut Assembly w/Spring | 4853039765/171493 - PHILTOP

2002-2003 Lexus ES300 3.0L V6 | Rear Strut Assembly w/Spring | 4853039765/171493 - PHILTOP

Rear

Complete Strut & Coil Spring Assembly

4.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9721SAA878ZUS

Specifications

Brand
PHILTOP
Items Included
1x Rear Right Complete Strut Assembly - 171492 1x Rear Left Complete Strut Assembly - 171493
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
OE Number
4853039765,4854039395
Part Number
171493,171492,SR4059,SR4058,181493,181492,LS57044,34TY1134,M57043,M57044,34TY1135

Highlights

  • Fitment: PHILTOP Struts with Coil Spring Assemblies for Camry 2002-2003, ES300 2002-2003.
  • OE NUMBER: 171492, 171493, 1332369R, 15342, 92140134, G57044, SR4058, SR4059, ST8627R, 1332369L, 15341, 2701501868, 92140135, G57043, ST8627L.
  • Bounce Reduction: PHILTOP struts reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
  • More Stable: A new increase tire grip. By increasing the spring rate factor, the rapid vibration of the wheels is suppressed and the tires are prevented from leaving the road.
  • Tips: For a better experience, please enter "year-make-model" to confirm the suitability of the product for your vehicle before purchasing.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 2003
MakeLexusToyotaToyotaToyotaToyotaToyotaToyota
ModelES300CamryCamryCamryCamryCamryCamry
TrimBaseLELESESEXLEXLE
Engine3.0L V62.4L L43.0L V62.4L L43.0L V62.4L L43.0L V6
Note
w/o Adaptive Variable Suspension
Replaces Part 181492,181493;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181492,181493;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181492,181493;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181492,181493;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181492,181493;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181492,181493;Recommended OE Application -Specific Replacement;Rear Left;Rear Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

总成无适配12

Reviews

4.0/5

Based on 1 review

50%
4100%
30%
20%
10%

Tom_Handy_189

03/08/2026

These struts feel pretty solid for the price. They definitely improved the ride quality over my old worn-out ones. Installation required a few extra tools, but I happened to have them, so it wasn't a deal-breaker for me.

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.

2002-2003 Lexus ES300 Strut Assembly Rear w/Spring | 4853039765 | PHILTOP