2009-2013 Toyota Corolla 1.8L/2.4L | Rear Shock Absorber w/Sway Bar link, w/Spring | 172599L - PHILTOP

2009-2013 Toyota Corolla 1.8L/2.4L | Rear Shock Absorber w/Sway Bar link, w/Spring | 172599L - PHILTOP

Rear

Complete Strut & Coil Spring Assembly

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5032SAA667NUS

Specifications

Brand
PHILTOP
Items Included
1x Rear Right Complete Strut Assembly - 172599R 1x Rear Left Complete Strut Assembly - 172599L
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
172599L,172599R,SR4239,SR4240

Highlights

  • Fitment: PHILTOP Struts with Coil Spring Assembly Fit Corolla 2009-2013.
  • Reference Number: 172599L, 172599R, 1345689L, 1345742L, 2345742L, SR4205, SR4240, 1345689R, 1345742R, 2345742R, 55S15064, 713391, SR4204, SR4239.
  • Driving Safety: The struts assembly provides the right suspension height and reduced frictional vibration. This greatly improves driving stability, ensures driving safety and experience.
  • Long Service Life: The shock absorbers are heat treated and anti-rust to ensure service life and anti-corrosion.
  • Easy installation: The complete pillar assembly includes all the components required for a single pillar replacement. OE standards make installation simpler.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20112012 - 20132009 - 20132009 - 20132009 - 20102009 - 2010
MakeToyotaToyotaToyotaToyotaToyotaToyota
ModelCorollaCorollaCorollaCorollaCorollaCorolla
TrimBaseLLESXLEXRS
Engine1.8L L41.8L L41.8L L41.8L L41.8L L42.4L L4
Note
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14-1

Reviews

4.7/5

Based on 18 reviews

578%
417%
36%
20%
10%

Yanelys Hernandez

09/09/2026

Verified buyer

Excelente producto. Exactamente lo que mi esposo necesitaba para su auto. Cumplió sus expectativas.

Annalay Portela

07/31/2026

Verified buyer

Estos amortiguadores los compré porque mi carro lo necesitaba me llegaron súper rápidos y en buen estado

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.