PHILTOP Rear Suspension Kit Upper Control Arm w/Ball Joints Compatible with Ford Explorer Aviator Mercury Mountaineer 2002-2005

PHILTOP Rear Suspension Kit Upper Control Arm w/Ball Joints Compatible with Ford Explorer Aviator Mercury Mountaineer 2002-2005

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7633OCA2353US

Specifications

Brand
PHILTOP
Items Included
1x Rear Right Upper Control Arm W/Ball Joint (Passenger) - MS40127/RK620667 1x Rear Left Upper Control Arm W/Ball Joint (Driver) - MS40126/RK620668
Quantity
2
Position
Rear Upper
Surface Finish
Polished
Material
Aluminum
Warranty Period
2-Year
OE Number
1L2Z5500AC,1L2Z5500AD
Part Number
RK620668,RK620667

Highlights

  • #53,008 in Automotive (See Top 100 in Automotive)
  • #107 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with Ford Explorer 2002-2005, compatible with Mercury Mountaineer 2002-2005, compatible with Lincoln Aviator 2003-2005
  • Suspension Kit Includes:1x Rear Right Upper Control Arm w/Ball Joint (Passenger) - MS40127/RK620667;1x Rear Left Upper Control Arm w/Ball Joint (Driver) - MS40126/RK620668
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20052002 - 20052002 - 20052002 - 2005200420042002 - 20032002 - 20052004 - 20052002 - 20052002 - 20052004 - 20052004 - 20052003 - 20052002 - 20042002 - 200420052005200520052004 - 20052004 - 2005
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordLincolnMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercury
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerAviatorMountaineerMountaineerMountaineerMountaineerMountaineerMountaineerMountaineerMountaineer
TrimEddie BauerEddie BauerLimitedLimitedNBXNBXPostalXLSXLS SportXLTXLTXLT SportXLT SportBaseBaseBaseConvenienceConvenienceLuxuryLuxuryPremierPremier
Engine4.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.0L V64.0L V64.0L V64.6L V84.0L V64.6L V84.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.6L V8
Note----------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Dennis McDeane

10/12/2026

Verified buyer

Great product so far. As described, and although there were no instructions, I had little problems with the removal and installation of this product.

Tom_Handy_561

11/10/2025

These control arms feel really well-made and durable. The price is great for the quality you get. My SUV feels much more planted and stable now. Definitely a good buy.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.

PHILTOP Rear Suspension Kit Upper Control Arm w/Ball Joints Compatible with Ford Explorer Aviator Mercury Mountaineer 2002-2005