1992-1995 Honda Civic 1.6L/1.5L | 1 PC Rear Wheel Bearing 513105 - PHILTOP

1992-1995 Honda Civic 1.6L/1.5L | 1 PC Rear Wheel Bearing 513105 - PHILTOP

Triple-Lip Seal

Rear

AISI 52100

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8516WBR048GUS

Specifications

Brand
PHILTOP
ABS Type
Tone Ring
Lug Count
4
Position
Rear
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Rear Wheel Hub and Bearing Assembly - 513105,Installation Instructions
Surface Finish
Polished, Rust Protected
Flange Offset
2.14 in/54.4 mm
Flange Diameter
5.35 in/135.8 mm
Brake Pilot Diameter
2.4 in/61.0 mm
Warranty Period
2-Year
OE Number
42200ST7C51,42200SR3A52,42200SR3A53,42200SK7A01,42200S04951,42200SO4951
Part Number
513105,40640002E,7350072,40640002,WE60417,0516042,H513105,713105,BR930113,VKBA3300,HUB00564,512042,NT513105,45000,HUB00539,QWB1312,CR7598,WH894,WH513105,HUB00537,HA513105,HZF170BR2B,PT513105,G513105,RW9105,HUB00566,HUB00532,HUB00543,0514080
Quantity
1

Highlights

  • Fitment: Rear Wheel Bearing Hub Assembly fits Civic 1992-1995, Integra 1990-2001, Civic del Sol 1995-1997.
  • Note: Select your vehicle's “Year, Make, Model” and click on “Check Fit” to make sure it fits your car, or check the product page instructions to make sure the wheel hub assemblies are an exact match.
  • Durable and Long-lasting: Our wheel bearings are made of high-quality materials and are therefore hard, flexible and wear-resistant. This significantly extends the service life of the wheel hub assembly. In addition, the wheel hubs are tested and comply with OE standards.
  • Restoring Vehicle Performance:Replacing the wheel hub bearings with new ones will solve the problem of rattling and wobbling of the vehicle. Our wheel bearing assemblies ensure your driving safety and experience.
  • Installation Advice: Although the wheel bearings conform to the original factory design, it is still recommended that you seek the help of a professional mechanic or refer to a specialized installation manual.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1990 - 19931997 - 20011992 - 19931994 - 20011994 - 20011995 - 19961992 - 19951994 - 19951994 - 19951994 - 1997
MakeAcuraAcuraAcuraAcuraAcuraAcuraHondaHondaHondaHonda
ModelIntegraIntegraIntegraIntegraIntegraIntegraCivicCivicCivicCivic del Sol
TrimGSGSGS-RGS-RLSSpecial EditionEXLXSiVTEC
Engine1.8L L41.8L L41.7L L41.8L L41.8L L41.8L L41.6L L41.5L L41.6L L41.6L L4
Note
4-Wheel ABS
-
4-Wheel ABS
4-Wheel ABS
4-Wheel ABS
4-Wheel ABS
Used For Both ABS and Non ABS Applications. Remove Tone Ring For Non ABS Applications If Clearance Is Needed
Used For Both ABS and Non ABS Applications. Remove Tone Ring For Non ABS Applications If Clearance Is Needed
Used For Both ABS and Non ABS Applications. Remove Tone Ring For Non ABS Applications If Clearance Is Needed
Used For Both ABS and Non ABS Applications. Remove Tone Ring For Non ABS Applications If Clearance Is Needed

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

Kelly_SUV_Life_81

10/09/2025

This bearing feels really solid and well-constructed. For the price, the quality is outstanding. My Integra's rear end feels much tighter now.

Jason_Trucks_683

11/09/2025

Fast shipping and the bearing fit perfectly on my Civic. Installation was smooth, and the car drives so much better. Really happy with how easy this was.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.