PHILTOP RK620334 Left Lower Control Arm With Ball Joint Assembly Suspension Kit For ES300 02-03,ES330/RX330 04-06,RX350 07-09,RX

PHILTOP RK620334 Left Lower Control Arm With Ball Joint Assembly Suspension Kit For ES300 02-03,ES330/RX330 04-06,RX350 07-09,RX

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6241CAK036FUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Left Control Arm - (Driver) - RK642726
Quantity
1
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
4806906070,4806906150,4806906100,480690E010
Part Number
RK620334

Highlights

  • (Adaptation Information):suitable for ES300 2002-2003,ES330/RX330 2004-2006,RX350 2007-2009,RX400h 2006-2008,Avalon 2005-2012,Camry 2002-2011,Highlander 2004-2007,Solara 2004-2008
  • (Package Content):1*RK620334
  • (Prompt):please confirm the product information before purchasing. If you encounter any problem, please leave a message to us. We will try our best to solve it for you.
  • (High Quality)polishing and rust prevention; The anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly.
  • (Easy to install):Our control arm kit are calibrated to specifications for proper fit and alignment

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20032004 - 20062004 - 20062007 - 20092006 - 20082005 - 200620092010 - 20112007 - 20082007 - 20112002 - 20092010 - 20112002 - 20062007 - 20112002 - 20092010 - 20112002 - 20032004 - 20062007 - 20112002 - 20092010 - 20112002 - 20062007 - 20112004 - 20072004 - 20072006 - 20072006 - 20072004 - 20072006 - 20072004 - 20082004 - 2008200620062004 - 20082004 - 20082007 - 20082007 - 2008
MakeLexusLexusLexusLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelES300ES330RX330RX350RX400hCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryCamryHighlanderHighlanderHighlanderHighlanderHighlanderHighlanderSolaraSolaraSolaraSolaraSolaraSolaraSolaraSolara
TrimBaseBaseBaseBaseBaseBaseBaseBaseCEHybridLELELELESESESESESEXLEXLEXLEXLEBaseBaseHybridHybrid LimitedLimitedSportSESESE SportSE SportSLESLESportSport
Engine3.0L V63.3L V63.3L V63.5L V63.3L V62.4L L42.4L L42.5L L42.4L L42.4L L42.4L L42.5L L43.0L V63.5L V62.4L L42.5L L43.0L V63.3L V63.5L V62.4L L42.5L L43.0L V63.5L V62.4L L43.3L V63.3L V63.3L V63.3L V63.3L V62.4L L43.3L V62.4L L43.3L V62.4L L43.3L V62.4L L43.3L V6
Note---
w/o Performance Package
-
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
Exc. Built In Japan
--------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

Steve_DIYer_522

03/20/2026

All the annoying noises are gone! The car feels way more stable and controlled. This kit really fixed the suspension issues I was having.

Brad_AutoParts_244

04/01/2026

Really solid construction, feels like it'll last. The price is way better than anything I found locally. My car handles like it's new.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.