1999-2004 Honda Odyssey 3.5L V6 | Strut Assembly | 171597 - PHILTOP

1999-2004 Honda Odyssey 3.5L V6 | Strut Assembly | 171597 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5848SAA722BUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 171597 1x Front Left Complete Strut Assembly - 171598
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
171597,171598,SR4072,SR4071

Highlights

  • FITS YOUR CAR: PHILTOP Complete Struts Replacement for Odyssey 1999 2000 2001 2002 2003 2004 Meet OE Standards, please Comfirm our products are compatible with your car
  • OE-QUALITY, VEHICLE-SPECIFIC DESIGH: To guarantee an optimised ride and driving experience particular to each car shape, application-specific coil springs, mounts, and struts are designed in the same manner as OEM components. #OE PART NUMBER# 171597 171598SAA722
  • RECOVERY PERFORMANCE OF 100%: Struts that are worn out add 20% to halting distance. After changing the PHILTOP struts component, reduce the stopping distance and increase the safety distance. Boost your driving confidence while reducing halting distance and increasing steering speed.
  • COMFORTABLE DRIVE: Our shock Struts absorbers offer powerful damping and stability for a stable ride that is pleasant for the driver and companion. It's also not an issue to drive on hills. We are dedicated to giving our clients the best transportation experience possible.
  • ADVANCE TIRE GRIP: The fast vibration of the wheel is decreased, the tyre is prevented from leaving the road, and workout stability is improved by increasing the spring stiffness coefficient. In order to absorb or delay the direct effect of energy, damping rods provide resistance through fluid flow, which reduces body vibration and bounce.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20021999 - 20042002 - 20041999 - 2004
MakeHondaHondaHondaHonda
ModelOdysseyOdysseyOdysseyOdyssey
TrimCargoEXEX-LLX
Engine3.5L V63.5L V63.5L V63.5L V6
Note
Recommended OE Application -Specific Replacement;Replaces Part 181597,181598
Recommended OE Application -Specific Replacement;Replaces Part 181597,181598
Recommended OE Application -Specific Replacement;Replaces Part 181597,181598
Recommended OE Application -Specific Replacement;Replaces Part 181597,181598

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

总成无适配12

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Emma_DailyCommute_445

04/02/2026

The quality on these is impressive, especially considering how affordable they were. My Odyssey feels stable and secure now, like it just rolled off the lot.

Mike from Texas_172

11/22/2025

Super easy to get these installed, everything lined up perfectly. Plus, they got here way faster than I expected. Great service all around!

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.