2013-2019 Ford Flex 3.5L V6 | Front Strut Assembly w/Spring | OE#DA8Z18124C/172656 - PHILTOP

2013-2019 Ford Flex 3.5L V6 | Front Strut Assembly w/Spring | OE#DA8Z18124C/172656 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6626SAA914PUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 172656 1x Front Left Complete Strut Assembly - 172655
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
OE Number
DA8Z18124C
Part Number
172656,172655,182656

Highlights

  • Fitment:Flex 2013-2019,MKT 2013-2019
  • Reference Number:172655, 172656, 11015, 11016, 1333549L, 1333549R, 714362, 714363, PM7000520, PM7000521, SCA72983
  • Made To Last: Design of high-quality oil seals and rubber dust boots to keep rocks off shocks to avoid leakage and deformation. Design of hollow bumper prevents shock damage when the car bottoms out. Spring Seat has open grooves to avoid water and sediment
  • Save The Labor: Safer and quicker installation with our fully pre-assembled complete struts that are precisely designed. Direct replacement of your old parts with no special tools required
  • Kit Includes:1x Front Right Complete Strut Assembly-172656,1x Front Left Complete Strut Assembly-172655,

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20192013 - 20192013 - 20192013 - 2016201720192013 - 20172013 - 20162013 - 201820192013 - 20162017 - 20182013 - 2017201920182018 - 2019
MakeFordFordFordLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincoln
ModelFlexFlexFlexMKTMKTMKTMKTMKTMKTMKTMKTMKTMKTMKTMKTMKT
TrimLimitedSESELBaseBaseBaseBaseEcoBoostLimousineLimousineLiveryLiveryLiveryLiveryPremiereReserve
Engine3.5L V63.5L V63.5L V62.0L L43.5L V63.5L V63.7L V63.5L V63.5L V63.7L V62.0L L43.5L V63.7L V63.7L V63.7L V63.5L V6
Note
Recommended OE Application -Specific Replacement;Front Left;Front Right
Recommended OE Application -Specific Replacement;Front Left;Front Right
Recommended OE Application -Specific Replacement;Front Left;Front Right
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension
w/o Electronic Adjustable Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

总成无适配12

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Mike from Texas_630

06/21/2026

Swapping these out was surprisingly easy. They fit perfectly and the ride quality improved dramatically. Definitely a good buy compared to what the local auto shop quoted me.

Lisa_CivicDriver_869

03/04/2026

Night and day difference on my MKT. No more clunking over bumps, and the ride is much more controlled. Definitely worth the upgrade.

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.