2007-2010 Hyundai Elantra 2.0L L4 | Rear Shock Absorber | OE#553112H100/5622 - PHILTOP

2007-2010 Hyundai Elantra 2.0L L4 | Rear Shock Absorber | OE#553112H100/5622 - PHILTOP

Rear

Shock Absorber

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5428SAA13GLUS

Specifications

Brand
PHILTOP
Items Included
2x Rear Shock Absorber - 349085
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Shock Absorber
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
OE Number
553112H100
Part Number
5622,349085,341715,32130331,785622,TS3230222B,HY105,NS5622

Highlights

  • Fitment:Elantra 2007-2010
  • Reference Number: 349085*2
  • Vehicle Specific: Check fitment information in the listing for compatibility
  • Save The Labor: Safer and quicker installation with our fully pre-assembled complete struts that are precisely designed. Direct replacement of your old parts with no special tools required
  • Kit Includes:Rear shock absorber 2 pack 349085*2

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20102007 - 201020072007 - 2010
MakeHyundaiHyundaiHyundaiHyundai
ModelElantraElantraElantraElantra
TrimBlueGLSLimitedSE
Engine2.0L L42.0L L42.0L L42.0L L4
Note
w/o Sport Suspension
w/o Sport Suspension
w/o Sport Suspension
w/o Sport Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

12

Reviews

4.6/5

Based on 8 reviews

575%
413%
313%
20%
10%

Dave. A

04/25/2025

Verified buyer

Shocks worked well on my 08 Hyundai Elantra!

Steve H.

02/17/2024

Verified buyer

No complaints

FAQS

Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.