Longer Lifespan - PHILTOP oem spark plugs fines the center electrode, providing better ignition performance and smoother environment, with excellent durability, heat and corrosion resistance, lasting for 100,000miles
Ignition Performance - OE fine wire iridium center wire tip design efficiently reducing carbon accumulation. The external sealing gasket can prevent combustion gas leakage and relief fuel consumption
Buy with Confidence - Spark plugs set of 4 included. Please check your vehicle's via the fitment filter before purchasing. Any further question, please be free to contact
Fit for 4 Cylinders- The automotive replacement spark plugs fit for L4 1.3L, 1.5L, 1.6L, 1.8L, 1.9L, 2.0L, 2.2L, 2.3L, 2.4L, 2.7L and H4 2.5L engine; Please confirm that this Spark Plugs will fit your car by using Suncentauto's garage.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.7/5
Based on 3 reviews
5
67%
4
33%
3
0%
2
0%
1
0%
Customer photos and videos
B
Brent
09/26/2026
Verified buyer
I was a bit hesitant on the off brand and no reviews but figured I would give it a try. I have a 2000 Pathfinder I just bought used with 250,000 miles on it. These spark plugs arrived in great condition, not sure if pre gapped but I didnt worry about it! The best part of this swap was actually getting a look at the state of my old plugs. The insulators on the used plugs had a distinctly white, ashy appearance, which immediately made me suspect the engine was running lean. That visual clue prompted me to poke around under the hood, and I ended up finding a sneaky air intake leak I wouldn't have noticed otherwise. With the leak patched up and these new plugs installed, the engine is idling smoothly and running great again. Highly recommended if you're due for a maintenance swap.
A
austinaustin
09/09/2026
Verified buyer
They fit right into a prius. Just grab the correct socket and a magnet tool and installation should be a breeze. The old ones were pretty gnarly looking which I thought wouldn't be the case with a prius, but I guess even hybrids can have gummed up spark plugs.
FAQS
Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.
Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
1998-2008 Toyota Corolla 1.8L L4 | 4 PC Iridium Spark Plug | OE#JE4118110/BKR5EIX11 - PHILTOP
Iridium
Torque: 25 N
Built to Last
SKU:
9546SPP002BUS
4.7
$14.13$1413
Check if this fits your vehicle
Select a vehicle to check this product.
Installation Torque
25 N
Items Included
4x Spark Plug - BKR5EIX-11
Ground Electrode Material
Iridium
Spark Plug Gap
0.0016 in/0.04 mm
Spark Plug Insulator Height
1.99 in/50.50 mm
Spark Plug Thread Diameter
0.55 in/14 mm
Spark Plug Reach
0.75 in
Quantity
4
Longer Lifespan - PHILTOP oem spark plugs fines the center electrode, providing better ignition performance and smoother environment, with excellent durability, heat and corrosion resistance, lasting for 100,000miles
Ignition Performance - OE fine wire iridium center wire tip design efficiently reducing carbon accumulation. The external sealing gasket can prevent combustion gas leakage and relief fuel consumption
Buy with Confidence - Spark plugs set of 4 included. Please check your vehicle's via the fitment filter before purchasing. Any further question, please be free to contact
Fit for 4 Cylinders- The automotive replacement spark plugs fit for L4 1.3L, 1.5L, 1.6L, 1.8L, 1.9L, 2.0L, 2.2L, 2.3L, 2.4L, 2.7L and H4 2.5L engine; Please confirm that this Spark Plugs will fit your car by using Suncentauto's garage.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.7/5
Based on 3 reviews
5
67%
4
33%
3
0%
2
0%
1
0%
Customer photos and videos
B
Brent
Sep 26,2026
Verified buyer
I was a bit hesitant on the off brand and no reviews but figured I would give it a try. I have a 2000 Pathfinder I just bought used with 250,000 miles on it. These spark plugs arrived in great condition, not sure if pre gapped but I didnt worry about it! The best part of this swap was actually getting a look at the state of my old plugs. The insulators on the used plugs had a distinctly white, ashy appearance, which immediately made me suspect the engine was running lean. That visual clue prompted me to poke around under the hood, and I ended up finding a sneaky air intake leak I wouldn't have noticed otherwise. With the leak patched up and these new plugs installed, the engine is idling smoothly and running great again. Highly recommended if you're due for a maintenance swap.
A
austinaustin
Sep 09,2026
Verified buyer
They fit right into a prius. Just grab the correct socket and a magnet tool and installation should be a breeze. The old ones were pretty gnarly looking which I thought wouldn't be the case with a prius, but I guess even hybrids can have gummed up spark plugs.
FAQS
Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.
Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.