PHILTOP Suspension Kit Rear Stabilizer Sway Bar Links Driver & Passenger Side Compatible with Chevrolet Chevy Equinox Torren

PHILTOP Suspension Kit Rear Stabilizer Sway Bar Links Driver & Passenger Side Compatible with Chevrolet Chevy Equinox Torren

Corrosion Resistant

Deformation Resistant

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1560OCA218JUS

Specifications

Brand
PHILTOP
Items Included
2x Rear Sway Bar Links - Driver & Passenger Side - K750427
Quantity
2
Position
Rear
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
15926031
Part Number
K750427,TC5601,SL90565XL,SL90565PR,SL90565

Highlights

  • Fitment:PHILTOP Control Arms compatible with Chevrolet Equinox 2008-2017 3.6L, compatible with GMC Terrain 2010-2017, compatible with Pontiac Torrent 2008-2009 3.6L
  • Suspension Kit Includes:2x Rear Sway Bar Links - Driver & Passenger Side - K750427
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 20172010 - 20172010 - 20172010 - 20122013 - 20172010 - 20162010 - 20122013 - 2016201720172008 - 20092013 - 20172013 - 20172015 - 20172010 - 20172010 - 20122013 - 20172010 - 20172010 - 20122013 - 20172008 - 2009
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCPontiac
ModelEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxTerrainTerrainTerrainTerrainTerrainTerrainTerrainTerrainTerrainTorrent
TrimLLSLTLTLTLTZLTZLTZPremierPremierSportDenaliDenaliSLSLESLESLESLTSLTSLTGXP
Engine2.4L L42.4L L42.4L L43.0L V63.6L V62.4L L43.0L V63.6L V62.4L L43.6L V63.6L V62.4L L43.6L V62.4L L42.4L L43.0L V63.6L V62.4L L43.0L V63.6L V63.6L V6
Note---------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

Tom_Handy_916

01/06/2026

The clunking noise over bumps is gone, and the car feels way more stable now. This kit really solved the problem I was having with the rear end. Highly recommend.

Nancy_FirstCar_528

04/10/2026

My Equinox was leaning in turns and felt wobbly. These new links totally firmed it up! Handles so much better now, like it's glued to the road. Big improvement.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.